Effect of Temperature and Hydrogen on the Micro-Fracture Behavior of Feal Intermetallic Alloy
Preprint
- 1 January 2021
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The fracture behavior of FeAl intermetallic alloy under the influence of temperature and hydrogen exposure was investigated by in-situ miniature fracture testing approach using notched micro-sized specimens within an Environmental Scanning Electron Microscope (ESEM). The three environmental conditions were designed so that the temperature and hydrogen effect can be investigated independently: in vacuum with 173K, in vacuum with 298K, and under certain water vapor pressure (450 Pa) with 298K. The fracture toughness of this non-ASTM-standard testing was evaluated using the experimental approach. The hydrogen embrittlement (15.0 MPa√m) was successfully detected with the experimental setup, and for the first time, a cryogenic toughness was found in this alloy (23.7 MPa√m at 298K and 37.5 MPa√m at 173K). The strong H-dislocation interaction and the enhanced dynamic solute dragging effect at 298K, which will result in localized plasticity, were proposed to account for this observation. A descriptive model was proposed to correlate the difference in the fracture surface and the underlying mechanism.Keywords
This publication has 52 references indexed in Scilit:
- Hydrogen embrittlement phenomena and mechanismsCorrosion Reviews, 2012
- Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimensPhilosophical Magazine, 2012
- In situ micro-cantilever tests to study fracture properties of NiAl single crystalsActa Materialia, 2012
- Study of crack tip deformation in FeAl and NiAl crystals with optical interference microscopy and atomic force microscopyPhilosophical Magazine A, 2002
- A comparative analysis of low temperature deformation in B2 aluminidesMaterials Science and Engineering: A, 2001
- Unloading yield point effects in iron aluminidesActa Materialia, 1998
- Strain rate sensitivity of ductility and fracture behaviors in a Fe–28Al alloyMaterials Science and Engineering: A, 1997
- Diffusion in intermetallic phases of the Fe–Al and Fe–Si systemsMaterials Science and Engineering: A, 1997
- Yielding and plastic flow behavior of B2-type Fe-39.5 mol.% A1 single crystals in compressionActa Metallurgica et Materialia, 1995
- A microscopically-shielded Griffith criterion for cleavage in grain oriented silicon steelActa Metallurgica et Materialia, 1994