Investigation of material extrusion parameters and printing material impacts on wear and friction using the Taguchi method
Author:
- 4 March 2025
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 31 (6) , 1222-1236
Abstract
Purpose: The purpose of this study is to find optimum production parameters using the Taguchi method in terms of printing material (a composite material produced from polylactic acid [PLA] and polypropylene [PP]) impacts on wear and friction. Design/methodology/approach: A composite filament coil was fabricated from PLA and PP pellets using a lab-based extrusion device. The hardness and chemical structure of the filaments were examined. The filament-based material extrusion process was used to produce cylindrical shapes for tribological (pin-on-disc) analyses. Moreover, Taguchi methodology was performed to find the most influential parameter on tribological characteristics. Findings: The hardness (Shore D) values of the filaments were polylactic acid (PLA) (85), polypropylene (PP) (58) and PLA and PP mixture of 50:50 (PLAPP) (63). Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis results show that PLA and PP mixtured successfully. The diameter deviation of all samples was found as lower than 5%. The honeycomb pattern presented the best dimensional accuracy. Changing printing patterns and temperatures affect the friction profile. Coefficient of friction (COF) values of cylindrical samples of PLA and PP samples around 0.35 and 0.31, respectively. Overall, material type for wear resistance applications is a key point. Originality/value: To the best of the author’s knowledge, there seems to be a lack of 3D-printed PP and PLAPP studied in terms of tribological aspects as a neat polymer. The tribological profiles of PP, PLA and PLAPP (PLA and PP mixture of 50:50) were investigated in this study. The author believe that this is a preliminary study that might close the gap and add some novel information to the current literature.Keywords
This publication has 51 references indexed in Scilit:
- Mechanical Properties, Energy Absorption, and Shape Memory Behavior of 3D Printed PLA‐MXene Nanocomposites and Gyroid LatticesAdvanced Engineering Materials, 2024
- Mechanical and Materialistic Characterization of Poly Lactic Acid/Zeolite/Hydroxyapatite CompositesJournal of Inorganic and Organometallic Polymers and Materials, 2023
- 3D printing of polylactic acid: recent advances and opportunitiesThe International Journal of Advanced Manufacturing Technology, 2023
- 3D printing of semicrystalline polypropylene: towards eliminating warpage of printed objectsBulletin of Materials Science, 2020
- Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) partsJournal of Applied Polymer Science, 2020
- Radical mechanism for the gas-phase thermal decomposition of propaneReaction Kinetics, Mechanisms and Catalysis, 2017
- Identification of polymers by means of DSC, TG, STA and computer-assisted database searchJournal of Thermal Analysis and Calorimetry, 2017
- Spectral Characterization of Four Kinds of Biodegradable Plastics: Poly (Lactic Acid), Poly (Butylenes Adipate-Co-Terephthalate), Poly (Hydroxybutyrate-Co-Hydroxyvalerate) and Poly (Butylenes Succinate) with FTIR and Raman SpectroscopyJournal of Polymers and the Environment, 2012
- Influences of polypropylene fiber and SBR polymer latex on abrasion resistance of cement mortarJournal of Wuhan University of Technology-Mater. Sci. Ed., 2010
- Poly(lactic acid)/polystyrene bioblends characterized by thermogravimetric analysis, differential scanning calorimetry, and photoacoustic infrared spectroscopyJournal of Applied Polymer Science, 2007