Slow drag in granular materials under high pressure
- 16 June 2004
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review E
- Vol. 69 (6) , 061306
Abstract
The resistance offered by a cylindrical rod to creeping cross flow of granular materials under pressure is investigated. The experimental system consists of a confined bed of granular particles, which are compacted under high pressure to consolidate the granular medium. A cylindrical rod is pulled at a constant and slow rate through the granular medium, and the measured pulling resistance is characterized as a drag force. The influence of various parameters such as the velocity of the cylindrical rod, the rod diameter and length, the granular particle size, and the compaction pressure on the required drag force is investigated experimentally. Nondimensional analysis is performed to simplify the relationships between these variables. The results show that the drag force is independent of the drag velocity, is linearly proportional to compaction pressure and rod diameter, and increases with rod length and particle size. Additional compaction experiments show that the effective density of the granular bed increases linearly with pressure, and similar behavior is noted for all particle sizes. These results should prove useful in the development of constitutive equations that can describe the motion of solid objects through compacted granular media under high pressure, such as during ballistic penetration of soils or ceramic armors.Keywords
This publication has 33 references indexed in Scilit:
- Slow and intermediate flow of a frictional bulk powder in the Couette geometryPowder Technology, 2003
- Analysis of a frictional–kinetic model for gas–particle flowPowder Technology, 2003
- Granular shear flow dynamics and forces: Experiment and continuum theoryPhysical Review E, 2001
- Granular drag on a discrete object: Shape effects on jammingPhysical Review E, 2001
- Nonlinear Elasticity of Granular MediaJournal of Applied Mechanics, 1997
- Penetration of semi-infinite AD995 alumina targets by tungsten long rod penetrators from 1.5 to 3.5 km/sInternational Journal of Impact Engineering, 1995
- Numerical modelling of normal impact on ceramic composite armoursInternational Journal of Impact Engineering, 1992
- The strength behavior of granulated silicon carbide at high strain rates and confining pressureJournal of Applied Physics, 1991
- Constitutive relations that imply a generalized Mohr-Coulomb criterionActa Mechanica, 1974
- A theory for the flow of granular materialsPowder Technology, 1974