Application of the foamed bitumen and bitumen emulsion to the road base mixes in the deep cold recycling technology
Open Access
- 20 December 2016
- journal article
- research article
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 11 (4) , 291-301
Abstract
This paper presents findings of a study concerning the influence of binder type on the mechanical properties of road base in the cold recycling technology. The principal aim of this investigation was to evaluate the mixes in scope of susceptibility to moisture and low-temperatures. In the comparative research foamed bitumen and bitumen emulsion were used in four different concentrations (2.0%, 2.5%, 3.0%, 3.5%). The materials used in the study were reclaimed from an existing road construction layers: reclaimed aggregate from the road base and reclaimed asphalt pavement obtained by milling the surface and binder course. Portland cement in 2.0% concentration was used as a hydraulic binder. The evaluated parameters were: indirect tensile strengths, tensile strength retained and indirect tensile stiffness modulus at 25 °C. These tests were complemented by an evaluation of susceptibility to moisture and frost according to modified procedures implemented by American researchers: Tunnicliff, Root and Lottman. Moreover, tests for low-temperature cracking were conducted according to Finnish standard. The investigations showed that the use of foamed bitumen for road base layer produced in the cold recycling technology results in better mechanical properties and resistance to moisture and frost compared to using bitumen emulsion. The use of 2.5% of foamed bitumen and 2.0% of Portland cement in the recycled road base allowed to meet the established criteria.Keywords
This publication has 13 references indexed in Scilit:
- Modeling of the Resilient Modulus for Recycled Asphalt Pavement Applications in Base Course LayersTransportation Research Record: Journal of the Transportation Research Board, 2013
- Laboratory Study on Mechanical Parameters of Foamed Bitumen Mixtures in the Cold Recycling TechnologyProcedia Engineering, 2013
- Moisture and Frost Resistance of the Recycled Base Rehabilitated with the Foamed Bitumen Technology / Odpornosc Na Oddziaływanie Wody I Mrozu Podbudowy W Technologii Recyklingu Z Asfaltem SpienionymArchives of Civil Engineering, 2012
- The determination of mechanical performance of laboratory produced hot mix asphalt mixtures using controlled RAP and virgin aggregate size fractionsConstruction and Building Materials, 2012
- Analysis and evaluation of possibilities for the use of warm mix asphalt in LithuaniaThe Baltic Journal of Road and Bridge Engineering, 2009
- Dynamic Modulus and Repeated Load Tests of Cold In-Place Recycling Mixtures Using Foamed AsphaltJournal of Materials in Civil Engineering, 2009
- Effects of moisture on strength and permanent deformation of foamed asphalt mix incorporating RAP materialsConstruction and Building Materials, 2008
- Verification of the Criteria for Evaluation of Water and Frost Resistance of Asphalt ConcreteRoad Materials and Pavement Design, 2008
- Foamed bitumen mixes = shear performance?International Journal of Pavement Engineering, 2007
- Use of foamed asphalt in recycling incinerator ash for construction of stabilized base courseResources, Conservation and Recycling, 2004