Toughening mechanism in polyoxymethylene/thermoplastic polyurethane blends
Authors:
- 16 August 2004
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 53 (11) , 1666-1671
Abstract
In order to better understand the toughening mechanism in polyoxymethylene (POM)/thermoplastic polyurethane (TPU) blends and obtain ‘super‐toughened’ POM, we carried out an investigation on the notched impact strength, fractured surface, inter‐particle distance and spherulite size of POM as a function of the TPU content. A compatibilizer, namely polystyrene‐block‐poly(ethylene–butylene)‐block‐polystyrene, grafted with maleic anhydride (SEBS‐graft‐MA), was used to enhance the interfacial interaction between the POM and TPU. The impact strength is found to increase in two steps as a function of TPU content, namely a linear increase at the very beginning, and then a jump of impact strength is seen when the TPU content is larger than 30 wt%. A ‘supertough behavior’ is not observed for POM/TPU blends at room temperature, but can be achieved after adding 5 wt% of SEBS‐graft‐MA as the compatibilizer. The impact strength was found to depend not only on the interparticle distance but also on the interfacial interactions between POM and TPU. The dependence of impact strength on crystal size is considered for the first time, and a single curve is constructed, regardless of the composition and interfacial interactions. Our results indicate that the crystal size of POM indeed plays a role in determining the toughness, and has to be considered when discussing the toughening mechanism. Copyright © 2004 Society of Chemical IndustryKeywords
This publication has 14 references indexed in Scilit:
- Ductile–brittle‐transition phenomenon in polypropylene/ethylene‐propylene‐diene rubber blends obtained by dynamic packing injection molding: A new understanding of the rubber‐toughening mechanismJournal of Polymer Science Part B: Polymer Physics, 2002
- Polyethylene toughened by CaCO3 particles: The interface behaviour and fracture mechanism in high density polyethylene/CaCO3 blendsPolymer, 1995
- Impact modification of engineering thermoplasticsJournal of Applied Polymer Science, 1994
- Polyethylene toughened by CaCO3 particle: Brittle‐ductile transition of CaCO3‐toughened HDPEJournal of Applied Polymer Science, 1993
- Polyethylene toughened by caco3 particles—percolation model of brittle‐ductile transition in hdpe/caco3 blendsPolymer International, 1993
- Polyethylene toughened by rigid inorganic particlesPolymer Engineering & Science, 1992
- Mechanical fracture behavior of polyacetal and thermoplastic polyurethane elastomer toughened polyacetalPolymer Engineering & Science, 1990
- Reply to commentsPolymer, 1990
- Properties of copolymer‐type polyacetal/polyurethane blendsJournal of Applied Polymer Science, 1988
- A generalized criterion for rubber toughening: The critical matrix ligament thicknessJournal of Applied Polymer Science, 1988