Effective extraction of titanium from rutile by a low‐temperature chloride process
Authors:
- 1 February 2000
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 46 (2) , 355-360
Abstract
The carbochlorination of rutile is carried out at high temperatures (800–1,500°C) in the commercial chloride processes of the pigment industry. Chlorination at high temperatures results in high energy consumption, rapid corrosion of the equipment, pipeline and control system, and agglomeration of solid reactants in the reactor. In a typical chloride process, rutile is used as a primary reactant, Cl2 as a chlorinating agent, and carbon as a reductant. The thermodynamic equilibrium simulation of the reaction system shows that a complete conversion of rutile is feasible at a temperature as low as 200°C. Kinetic and diffusion barriers, however, make the reaction practically impossible at low temperatures. In the study, these barriers were removed by intensifying the rutile‐carbon solid–solid contact. In the low‐temperature chloride process developed, reaction temperatures are reduced to 350–450°C. The conversion rate of the rutile at 385°C is 30% higher than that at 1,000°C. A fluidized‐bed reactor was used for the chlorination process. It was concluded that the formation of an activated TiO2CCl complex on the TiO2/C interface accounts for the gas–solid–solid reaction mechanism.Keywords
This publication has 7 references indexed in Scilit:
- Carbochlorination of tantalum and niobium oxides: Thermodynamic simulation and kinetic modelingAIChE Journal, 1999
- Carbochlorination kinetics of titanium dioxide with carbon and carbon monoxide as reductantMetallurgical and Materials Transactions B, 1998
- Fluidization of micron-size ceramic powders in a small-diameter fluidized bedPowder Technology, 1994
- On the kinetics of the chlorination of titanium dioxide in the presence of solid carbonMetallurgical Transactions B, 1980
- High temperature chlorination of titanium bearing minerals: part IVMetallurgical Transactions B, 1979
- Fluidized-bed chlorination rates of australian rutileMetallurgical and Materials Transactions B, 1976
- Types of gas fluidizationPowder Technology, 1973