Specificity of UV-C LED disinfection efficacy for three N95 respirators
Open Access
- 28 July 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-12
Abstract
The recent surge in the use of UV technology for personal protective equipment (PPE) has created a unique learning opportunity for the UV industry to deepen surface disinfection knowledge, especially on surfaces with complex geometries, such as the N95 filter facepiece respirators (FFR). The work outlined in this study addresses the interconnectedness of independent variables (e.g., UV Fluence, respirator material) that require consideration when assessing UV light efficacy for disinfecting respirators. Through electron microscopy and Fourier-transform infrared (FTIR) spectroscopy, we characterized respirator filter layers and revealed that polymer type affects disinfection efficacy. Specifically, FFR layers made from polypropylene (PP) (hydrophobic in nature) resulted in higher disinfection efficiency than layers composed of polyethylene terephthalate (PET-P) (hygroscopic in nature). An analysis of elastic band materials on the respirators indicated that silicone rubber-based bands achieved higher disinfection efficiency than PET-P bands and have a woven, fabric-like texture. While there is a strong desire to repurpose respirators, through this work we demonstrated that the design of an appropriate UV system is essential and that only respirators meeting specific design criteria may be reasonable for repurposing via UV disinfection.Keywords
All Related Versions
Funding Information
- NSERC COVID-19 Alliance Grant (ALLRP 549988-20)
- NSERC/Halifax Water Industrial Research Chair program (IRCPJ: 349838-16)
This publication has 38 references indexed in Scilit:
- Effects of Ultraviolet Germicidal Irradiation (UVGI) on N95 Respirator Filtration Performance and Structural IntegrityJournal of Occupational and Environmental Hygiene, 2015
- Introduction to Plastics and Polymers2012
- Inhibitory Effects of UV Treatment and a Combination of UV and Dry Heat against Pathogens on Stainless Steel and Polypropylene SurfacesJournal of Food Science, 2011
- Inactivation of Murine Norovirus 1, Coliphage φX174, andBacillus fragilisPhage B40-8 on Surfaces and Fresh-Cut Iceberg Lettuce by Hydrogen Peroxide and UV LightApplied and Environmental Microbiology, 2011
- A pandemic influenza preparedness study: Use of energetic methods to decontaminate filtering facepiece respirators contaminated with H1N1 aerosols and dropletsAmerican Journal of Infection Control, 2011
- A method to determine the available UV-C dose for the decontamination of filtering facepiece respiratorsJournal of Applied Microbiology, 2011
- Evaluation of Five Decontamination Methods for Filtering Facepiece RespiratorsAnnals of Occupational Hygiene, 2009
- Dose requirements for UVC disinfection of catheter biofilmsBiofouling, 2009
- Inactivation of human pathogens and spoilage bacteria on the surface and internalized within fresh produce by using a combination of ultraviolet light and hydrogen peroxideJournal of Applied Microbiology, 2008
- The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applicationsJournal of Micromechanics and Microengineering, 1997