Seismic Retrofit of a Multispan Prestressed Concrete Girder Bridge with Friction Pendulum Devices
Open Access
- 1 January 2018
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2018 (1)
Abstract
The paper deals with the proposal and application of a procedure for the seismic retrofit of an existing multispan prestressed concrete girder bridge defined explicitly for the use of friction pendulum devices as an isolation system placed between piers top and deck. First, the outcomes of the seismic risk assessment of the existing bridge, performed using an incremental noniterative Nonlinear Static Procedure, based on the Capacity Spectrum Method as well as the Inelastic Demand Response Spectra, are described and discussed. Then, a specific multilevel design process, based on a proper application of the hierarchy of strength considerations and the Direct Displacement‐Based Design approach, is adopted to dimension the FPD devices. Furthermore, to assess the impact of the FPD nonlinear behaviour on the bridge seismic response, a device model that reproduces the variation of the normal force and friction coefficient, the bidirectional coupling, and the large deformation effects during nonlinear dynamic analyses was used. Finally, the paper examines the effects of the FPD modelling parameters on the behaviour of the retrofitted bridge and assesses its seismic response with the results pointing out the efficiency of the adopted seismic retrofit solution.Keywords
This publication has 37 references indexed in Scilit:
- Direct displacement-based design of seismically isolated bridgesBulletin of Earthquake Engineering, 2008
- Effect of isolator and ground motion characteristics on the performance of seismic-isolated bridgesEarthquake Engineering & Structural Dynamics, 2005
- Frictional Behavior of Steel-PTFE Interfaces for Seismic IsolationBulletin of Earthquake Engineering, 2005
- Comparison of dynamic response of isolated and non-isolated continuous girder bridges subjected to near-fault ground motionsEngineering Structures, 2004
- Performance estimates in seismically isolated bridge structuresEngineering Structures, 2004
- Physical model for dynamic analysis of structures with FPS isolatorsEarthquake Engineering & Structural Dynamics, 2003
- Performance‐based seismic engineering: the need for a reliable conceptual comprehensive approachEarthquake Engineering & Structural Dynamics, 2001
- Consistent inelastic design spectra: Strength and displacementEarthquake Engineering & Structural Dynamics, 1994
- Seismic response of heavily damped base isolation systemsEarthquake Engineering & Structural Dynamics, 1993
- Random vibration of hysteretic systems under bi‐directional ground motionsEarthquake Engineering & Structural Dynamics, 1986