A Capacitive Stacking Mixer-First Receiver With Higher Order Capacitive Feedback
Open Access
- 23 January 2025
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (9) , 3148-3163
Abstract
This article presents a capacitive stacking mixer-first receiver (MF-RX) with a higher order capacitive feedback (CFB) loop designed to increase interferer rejection right at the mixer baseband (BB) node, benefiting both the out-of-band (OOB) linearity of the passive mixer switches and the active BB circuitry. The CFB loop consists of a left-half-plane (LHP) and right-half-plane (RHP) zero together with an OOB complex pole pair so as to transition in-band (IB) positive feedback into stronger OOB negative feedback, resulting in a steep closed-loop (CL) filtering slope of −15 dB/octave. Using a normalized BB model, the CFB loop is implemented on the system level while a dual-path approach is introduced to map the system to the schematic level. A prototype of the MF-RX is realized in 22-nm fully depleted silicon-on-insulator (FDSOI) technology and achieves an adjacent-channel third-order intercept point (IIP3) of over 18 dBm across the wide 1.2–7.2-GHz local oscillator (LO) range as a direct result of the improved selectivity. The design achieves a channel bandwidth (BW) of 40 MHz, while the total radio frequency (RF)-to-BB gain is 32 dB. The $2\times $ passive voltage gain of the capacitive stacking MF-RX enables a static power consumption of 9.7 mW at a minimum double sideband (DSB) noise figure (NF) varying from 5.1 to 9.0 dB across the LO range.Keywords
Funding Information
- European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Program (834389)
This publication has 31 references indexed in Scilit:
- Analysis and Design of a 260-MHz RF Bandwidth +22-dBm OOB-IIP3 Mixer-First Receiver With Third-Order Current-Mode Filtering TIAIEEE Journal of Solid-State Circuits, 2020
- A Fully Passive RF Front End With 13-dB Gain Exploiting Implicit Capacitive Stacking in a Bottom-Plate N-Path Filter/MixerIEEE Journal of Solid-State Circuits, 2019
- Design and Analysis of Enhanced Mixer-First Receivers Achieving 40-dB/decade RF SelectivityIEEE Journal of Solid-State Circuits, 2019
- High-linearity bottom-plate mixing technique with switch sharing for N-path filters/mixersIEEE Journal of Solid-State Circuits, 2018
- Enhanced-Selectivity High-Linearity Low-Noise Mixer-First Receiver With Complex Pole Pair Due to Capacitive Positive FeedbackIEEE Journal of Solid-State Circuits, 2018
- Beamformer With Constant-Gm Vector Modulators and Its Spatial Intermodulation DistortionIEEE Journal of Solid-State Circuits, 2017
- Reconfigurable Receiver With Radio-Frequency Current-Mode Complex Signal Processing Supporting Carrier AggregationIEEE Journal of Solid-State Circuits, 2015
- A Noise-Cancelling Receiver Front-End With Frequency Selective Input MatchingIEEE Journal of Solid-State Circuits, 2015
- A 1.8 dB NF Blocker-Filtering Noise-Canceling Wideband Receiver With Shared TIA in 40 nm CMOSIEEE Journal of Solid-State Circuits, 2015
- Channel Selection at RF Using Miller Bandpass FiltersIEEE Journal of Solid-State Circuits, 2014