The Propagation of a Circumferential Fatigue Crack in Medium-Carbon Steel Bars Under Combined Torsional and Axial Loadings
Authors:
- 1 January 1999
- book chapter
- Published by ASTM International
- p. 295-311
Abstract
The propagation behavior of a circumferential crack in a cylindrical bar of a medium carbon steel was studied extensively under various combinations of cyclic torsion and axial loading. First, the threshold condition of fatigue crack propagation was discussed in terms of the stress intensity factor. The threshold condition of fatigue crack extension was expressed by a quarter-elliptic function of the stress intensity ranges for Mode I and III. The equation can be derived on the basis of the crack-tip displacement criterion. The threshold condition for fracture is also expressed by another quarter-elliptic function. Next, the J-integral was applied to flat-type fatigue crack propagation with excessive plasticity under high cyclic loads. The crack propagation rate was expressed as a power function of the J-integral range for Mode I, and also for Mode III. The propagation rate is lower under Mode III loading than under Mode I loading, when a comparison is made at the same ΔJ value. The crack propagation rates under mixed-mode loading, as a function of ΔJ, lie between the relations for Mode I and Mode III. Striations were observed on the fatigue fracture surface that was created under mixed mode loading, and the striation spacing was equal to the crack propagation rate as it also was for the case of Mode I loading.Keywords
This publication has 16 references indexed in Scilit:
- ESTIMATION OF TORSIONAL FATIGUE STRENGTH OF MEDIUM CARBON STEEL BARS WITH A CIRCUMFERENTIAL CRACK BY THE CYCLIC RESISTANCE‐CURVE METHODFatigue & Fracture of Engineering Materials & Structures, 1998
- Approximate formulae for estimating the of a circumferentially cracked round bar under tension or torsionEngineering Fracture Mechanics, 1988
- Some observations on mode III fatigue thresholdsInternational Journal of Fracture, 1985
- FATIGUE AT NOTCHES SUBJECTED TO REVERSED TORSION AND STATIC AXIAL LOADSFatigue & Fracture of Engineering Materials & Structures, 1985
- The fatigue crack direction and threshold behaviour of mild steel under mixed mode I and III loadingInternational Journal of Fatigue, 1985
- Sliding mode crack closure and mode III fatigue crack growth in mild steelActa Metallurgica, 1983
- Mode III and Mode I fatigue crack propagation behaviour under torsional loadingJournal of Materials Science, 1983
- Effects of friction and high torque on fatigue crack propagation in Mode IIIMetallurgical Transactions A, 1982
- A contribution to mode III fatigue crack propagationMaterials Science and Engineering, 1982
- Mode III fatigue crack propagation in low alloy steelMetallurgical Transactions A, 1982