EFFECT OF CeO2ON SINTERING TEMPERATURE AND PIEZOELECTRIC PROPERTIES PZT (Zr:Ti = 52:48) CERAMICS
Authors:
- 20 April 2005
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 19 (10) , 1757-1769
Abstract
The purpose of this research is to investigate the structure of lead zirconate titanate ceramics (Zr:Ti = 52:48) doped with CeO2and corresponding properties such as micro-structural properties, physical properties, dielectric constant (εr), piezoelectric properties (kp, Qm, and d33), and the ferroelectric property. The specimens were prepared via a conventional mixed oxide method and sintered at 1200°C. Rietveld refinement of X-ray diffraction patterns resulted in the P4mm tetragonal structure for all samples. At a high dopant content (10 mol%), pyrochlore phases of CeO2appeared which caused the detriment of dielectric and piezoelectric properties. At a low dopant content (1 mol%), Ce4+ions entered the B site with isovalent dopant effects, and clearly resulted lower values of εr, and kpcompared with those of the undoped sample. The hysteresis loops showed ferroelectric properties for all samples. Microstructures displayed dense grain distribution and thus yielded a high density. The additional phase of CeO2was clearly observed for 10 mol% doping which implied it was overdoped. Finally, the Curie temperature has been found to decrease with increasing dopant content, as determined from high temperature X-ray diffraction and differential scanning calorimetry.Keywords
This publication has 17 references indexed in Scilit:
- Reaction sintering of partially reacted system for PZT ceramics via a high-energy ball millingScripta Materialia, 2001
- Finite-Temperature Properties ofAlloys from First PrinciplesPhysical Review Letters, 2000
- Origin of the High Piezoelectric Response inPhysical Review Letters, 2000
- Tetragonal-to-monoclinic phase transition in a ferroelectric perovskite: The structure ofPhysical Review B, 2000
- Preparation and characterization of Pb(Zr0.52Ti0.48)O3 ceramics from high-energy ball milling powdersMaterials Letters, 2000
- A new method for the preparation of compositionally homogeneous and pyrochlore-free solid solution of Pb(Mg1/3Ta2/3)O3–Pb(Yb1/2Ta1/2)O3 systemMaterials Research Bulletin, 1999
- Mechanochemical Synthesis of Lead Zirconate Titanate from Mixed OxidesJournal of the American Ceramic Society, 1999
- Preparation of Lead Zirconate Titanate (Pb(Zr 0.52 Ti 0.48 )O 3 ) by Homogeneous Precipitation and CalcinationJournal of the American Ceramic Society, 1999
- A monoclinic ferroelectric phase in the Pb(Zr1−xTix)O3 solid solutionApplied Physics Letters, 1999
- Synthesis of Compositionally Homogeneous Sr(Cu
x
Zn
1−
x
) 1/2 W 1/2 O 3Journal of the American Ceramic Society, 1992