Analysis for Hydrogen Concentration in Titanium Alloys Using Multifrequency Eddy Current
- 19 August 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-8
Abstract
In this article, multifrequency eddy current testing is proposed to detect hydrogen concentration in alloy titanium. The effect of hydrogen on the titanium alloy was explored across the surface layer of the material. The sample has a fixed surface area, and the samples with the same thickness and different hydrogen concentrations are analyzed. Output voltage amplitudes and dielectric loss tangent in hydrogen-filled titanium VT1-0 were studied in the range of hydrogen concentration from 0.019 to 0.290 wt.% using the instrument Micromagnetic Multiparameter Microstructure and Stress Analysis (3MA-II) at the frequency from 200 to 1000 kHz. This article proposes a method of analyzing the internal conductivity of metals by eliminating surface effects. The linear relationship between hydrogen concentration and conductivity is obtained, and the experimental results that are closer to the theory than the four-probe method and the inclusion surface are obtained. The results show that the output signal amplitudes decreased with an increase of the hydrogen concentration and frequency, and in addition, the dielectric loss tangent obtains a similar result at the hydrogen concentra- tion >0.100 wt.%. It is shown that this method can be used to evaluate the concentration of hydrogen in metal.Keywords
Funding Information
- Program for Competitiveness Enhancement Program of Tomsk Polytechnic University
This publication has 40 references indexed in Scilit:
- The effect of electron beam treatment on hydrogen sorption ability of commercially pure titaniumApplied Surface Science, 2013
- Thermal Behavior of Hydrogen Retained in Amorphous-titanium-hydride Thin FilmsJournal of Physics: Conference Series, 2013
- Glow discharge optical emission spectroscopy for accurate and well resolved analysis of coatings and thin filmsThin Solid Films, 2011
- Utilization of thorium in a high power density hybrid reactor with innovative coolantsEnergy Conversion and Management, 2007
- Thickness measurement of non-magnetic plates using multi-frequency eddy current sensorsNDT & E International, 2007
- Characterization of Electric and Magnetic Material Properties with Eddy-Current MeasurementsNondestructive Testing and Evaluation, 1998
- Deuterium phase behavior in thin-film PdPhysical Review B, 1998
- Analytical solutions in eddy current testing of layered metals with continuous conductivity profilesIEEE Transactions on Magnetics, 1995
- Electrical resistivity of palladium-silver alloys at high temperaturesPhysical Review B, 1977
- The Electrical Conductivity of MetalsNature, 1928