Epitaxial Bi∕GaAs diodes via electrodeposition
- 1 July 2006
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 24 (4) , 2138-2143
Abstract
Epitaxial Bi∕GaAs diodes have been formed by electrodeposition from bismuth nitrate and ammonium sulfate ((NH4)2SO4) aqueous solutions. Bi grows (0001) oriented on both GaAs (111)B and (001) substrates while it tilts 16° to a (011̱8) surface orientation for (011) GaAs. The metal orients in all cases with its {112̱0} planes parallel the GaAs {110} planes. Diodes prepared on (001), (111)B, and (011) wafers have current-voltage barrier heights ΦBIV that vary from 0.74, to 0.76, to 0.83eV (n=1.01–1.11), respectively. These barrier heights straggle values from earlier reports for polycrystalline Bi deposited by ultrahigh vacuum techniques or electrodeposition. Barrier heights measured from high frequency, capacitance-voltage characteristics are higher than the ΦBIV results, 0.06–1.5eV, as a function of the GaAs orientation, increasing in value in order of (011), (001), to (111)B. This is explained by a combination of image force lowering and field emission corrections, and interface state/dipoles that are likely dependent on the GaAs orientation and on the degree of (0001) Bi alignment. These results are supported by cross-sectional transmission electron microscopy investigations indicating abrupt Bi∕GaAs interfaces without evidence of a significant interfacial oxide or reacted layer.Keywords
This publication has 29 references indexed in Scilit:
- Recent advances in Schottky barrier conceptsMaterials Science and Engineering: R: Reports, 2001
- Direct Observation of Magnon Excitation in a Ferromagnetic Tunnel Junction Using Inelastic-Electron-Tunneling SpectroscopyJapanese Journal of Applied Physics, 1999
- Summary of Schottky barrier height data on epitaxially grown n- and p-GaAsThin Solid Films, 1998
- Schottky Contacts on n-InP with High Barrier Heights and Reduced Fermi-Level Pinning by a Novel In Situ Electrochemical ProcessJapanese Journal of Applied Physics, 1995
- Effect of orientation on the Schottky barrier height of thermodynamically stable epitaxial metal/GaAs structuresJournal of Vacuum Science & Technology A, 1992
- Medium-energy ion-scattering study of a possible relation between the Schottky-barrier height and the defect density at/Si(111) interfacesPhysical Review B, 1990
- Schottky barriers at/Si(111) interfacesPhysical Review B, 1990
- Electrical study of Schottky barriers on atomically clean GaAs(110) surfacesPhysical Review B, 1986
- Electrical properties of ideal metal contacts to GaAs: Schottky-barrier heightJournal of Vacuum Science & Technology B, 1984
- Schottky-Barrier Formation at Single-Crystal Metal-Semiconductor InterfacesPhysical Review Letters, 1984