Bound Water Content and Pore Size Distribution of Thermally Modified Wood Studied by NMR
Open Access
Abstract
The physical and mechanical properties of thermally modified wood (TMW) have been comprehensively studied; however, the quantitative analysis of water states and cell wall pores of TMW is limited. In this work, Douglas fir and Norway spruce were thermally modified at 180, 200 and 220 °C, and then studied by NMR cryoporometry method. The results show that thermally modified samples had lower fiber saturation point and the bound water content than the reference samples at all the experimental temperatures, indicating the reduced hygroscopicity due to thermal modification (TM). In addition, TM decreased number of hygroscopic groups, which can be implied by the decreased proportion of bound water sites, and TM also increased the proportion of small voids for bound water clusters. An increase in TM intensity resulted in lower bound water content and a smaller number of hygroscopic groups. In summary, the NMR method detected the water states and pore size distribution and confirmed that TM decreased the fiber saturation point and hygroscopicity of wood by reducing the bound water content and proportion of bound water sites in wood cell walls.Keywords
This publication has 29 references indexed in Scilit:
- Moisture in softwoods: fiber saturation point, hydroxyl site content, and the amount of micropores as determined from NMR relaxation time distributionsHolzforschung, 2012
- Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetryCarbohydrate Polymers, 2006
- Pore and Matrix Distribution in the Fiber Wall Revealed by Atomic Force Microscopy and Image AnalysisBiomacromolecules, 2004
- Characterisation of pore structure by combining mercury porosimetry and micrographyMaterials and Structures, 2001
- Low-Temperature Phase Transition of Water Confined in Mesopores Probed by NMR. Influence on Pore Size DistributionThe Journal of Physical Chemistry, 1996
- Characterization of porous solids by NMRPhysical Review Letters, 1993
- CONTIN: A general purpose constrained regularization program for inverting noisy linear algebraic and integral equationsComputer Physics Communications, 1982
- A constrained regularization method for inverting data represented by linear algebraic or integral equationsComputer Physics Communications, 1982
- Transverse NMR relaxation of water in woodJournal of Applied Polymer Science, 1979
- Importance of classical diffusion in NMR studies of water in biological cellsPhysical Review A, 1979