Nozzle Geometry and Forward Velocity Effects on Noise for CTOL Engine-Over-Wing Concept

Authors:

Abstract
Wing acoustic‐shielding benefits for CTOL application were studied for a variety of exhaust nozzles, including convergent circular, bypass, six‐tube mixer, and the mixer with ejector. The equivalent diameters for the nozzles ranged from 1.6 to 2.9 in. while the wind chord was 13 in. A 13‐in.‐diameter free jet was used to provide forward velocity. Farfield noise data were obtained at subsonic jet pressure ratios from 1.3 to 1.7 and forward velocities up to 260 ft/sec. The data are presented in terms of SPL and PWL spectra, directivity, and total power. The studies showed that jet noise shielding benefits were attained at a directivity angle of 90° with all nozzle‐wing configurations. Forward velocity, except for local regions that were a factor of nozzle geometry, did not alter the shielding benefits obtained statically; the absolute magnitude of noise shielding varied in a manner similar to that for nozzle‐only operation. The shielding effectiveness (configuration SPL minus nozzle‐only SPL) are discussed and compared for the nozzle‐wing configurations tested. In terms of sound power spectra, the presence of the wing had only a second‐order effect on noise generation.