INVESTIGATE THE DRY ABRASION BEHAVIOR OF AISI316 CLADS ON 080M40 STEEL USING A WIRE ARC ADDITIVE MANUFACTURING PROCESS
- 25 July 2025
- journal article
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
Abstract
The wear and tear of tillage tools due to dry abrasive soil interaction remains a persistent challenge in agricultural operations, often leading to frequent replacements and higher maintenance costs. Despite efforts using various surface modification techniques, the application of stainless-steel cladding through Wire Arc Additive Manufacturing (WAAM) remains underexplored for such tools. Addressing this gap, the present study aims to enhance the wear resistance of 080M40 steel, a commonly used material for tillage applications, by depositing AISI316 stainless steel clads using the WAAM process. The cladding was performed under three parameter sets, varying current (135–155[ ]A), voltage (16.0–19.0[ ]V), wire feed rate (3–5[ ]m/min), and scanning speed (8–10[ ]cm/min). Dry abrasion testing was conducted to evaluate the mass loss of both cladded and uncladded samples. Among the samples, AS3 fabricated at 155 A, 19.0[ ]V, 5[ ]m/min wire feed, and 10[ ]cm/min scan speed exhibited the lowest mass loss (1.518[ ]g for VT and 1.655[ ]g for HT specimens), demonstrating its superior abrasion resistance. The AS3 cladded samples exhibited an approximate 50–55% reduction in mass loss compared to the uncladded 080M40 steel, demonstrating significantly enhanced abrasive wear resistance. Failure analysis further revealed a ductile fracture in the substrate and a mixed mode in the cladded surface, signifying the mechanical reliability of the developed coating. This study contributes a novel approach to improving the longevity and functional performance of tillage tools under abrasive environments.Keywords
This publication has 21 references indexed in Scilit:
- Enhancing Tribological Performance of SS-316 Through Microwave Cladding of NiCr-Cr3C2 Composite: Fabrication, Characterization, and OptimizationJOM, 2024
- Influence of different rare earth oxides on CNC ultrasonic machining of HP-HVOLF sprayed ceramics coatingCeramics International, 2024
- Slurry abrasion behaviour of ERNiCrMo-3 cladding on EN8 steel developed by WAAMMaterials Letters, 2024
- Comprehensive analysis of tool wear, surface roughness and chip morphology in sustainable turning of Inconel-601 alloyJournal of Manufacturing Processes, 2023
- Optimization of wear parameters for AISI 4140 using Taguchi grey relational analysisMaterials Today: Proceedings, 2022
- Analysis of the wear properties of through hardened AISI-4140 alloy steel using Taguchi techniqueMaterials Today: Proceedings, 2022
- Effect of Fe and Ni contents on microstructure and wear resistance of aluminum bronze coatings on 316 stainless steel by laser claddingSurface and Coatings Technology, 2018
- A Review of Tillage Practices and Their Potential to Impact the Soil Carbon Dynamics2018
- Tillage effects on soil hydraulic properties in space and time: State of the scienceSoil and Tillage Research, 2008
- Influence of local soil conditions on mouldboard ploughshare abrasive wearTribology International, 2008