Performance of a gliding arc plasmatron pilot reactor with an integrated carbon bed and recirculation for upscaled CO2 conversion
- 9 May 2025
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 10 (8) , 1910-1923
Abstract
In this work, we investigated the performance of a multi-reactor gliding arc plasmatron (MRGAP) pilot reactor with an integrated carbon bed and recirculation. Experimentally, we varied the following parameters: carbon bed position, total flow rate, recirculation and a semi-continuous feeding system. The optimum operating conditions were found to be with the carbon bed located closest to the reactor outlets (35 mm) at a flow rate of 50 L min−1 with a semi-continuous carbon feed. Under these conditions, we obtain a maximum CO2 conversion of 20%, corresponding to a conversion rate of 1068 g h−1 and a CO concentration of 33 vol% at the outlet. The plug-power based energy cost (EC) for these optimum conditions was 5.8 MWh tCO −1 (1.2 MJ mol CO2 −1). When implementing a gas recirculation stage, the CO2 conversion increases from 10.3% to 12.7%, but the EC rises from 10.9 MWh tCO −1 to 13.7 MWh tCO −1. To complement the experimental work, we also developed a 2D model of the post-plasma chamber, coupled to a simple model for the plasma reactor. The model enables further insights into the effect of the carbon bed position and temperature on the performance, and confirms that when the carbon bed is positioned closer to the inlets, the performance increases. Both experimental and modelling results indicate that the integration of a carbon bed into an industrial scale plasma reactor is viable and can improve both the CO2 conversion and energy metrics.Keywords
Funding Information
- Agentschap Innoveren en Ondernemen (HBC.2023.0685)
- Agentschap Innoveren en Ondernemen (HBC.2022.0445)
This publication has 34 references indexed in Scilit:
- Coupling a CO2 plasma with a carbon bed: The closer the betterChemical Engineering Journal, 2025
- Coupled multi-dimensional modelling of warm plasmas: Application and validation for an atmospheric pressure glow discharge in CO2/CH4/O2Chemical Engineering Journal, 2024
- Effusion nozzle for energy-efficient NOx production in a rotating gliding arc plasma reactorChemical Engineering Journal, 2022
- Carbon bed post-plasma to enhance the CO2 conversion and remove O2 from the product streamChemical Engineering Journal, 2022
- Gliding Arc Plasmatron: Providing an Alternative Method for Carbon Dioxide ConversionChemSusChem, 2017
- Carbon dioxide elimination and regeneration of resources in a microwave plasma torchEnvironmental Pollution, 2016
- Haber process for ammonia synthesisResonance, 2011
- Activated carbon monolith of high thermal conductivity for adsorption processes improvementChemical Engineering and Processing - Process Intensification, 2007
- Absolute rates of the carbon‐carbon dioxide reactionAIChE Journal, 1985
- The sorption of propane in slurries of active carbon in waterThe Chemical Engineering Journal, 1979