Losses in Sensorless Controlled Permanent-Magnet Synchronous Machines
Open Access
- 19 January 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 46 (2) , 590-593
Abstract
The aim of the research is to investigate how much the losses in a permanent-magnet synchronous machine (PMSM) increase by the test pulses that are injected for sensorless control, i.e., to obtain rotor position information without using a position sensor. The current responses to the voltage test pulses in the machine are used as input of a 2-D transient finite element model (FEM) of the PMSM, to compute the field distribution. The magnet losses are calculated by a 3-D FEM of one magnet and a part of the rotor yoke only. To find the iron losses in the SiFe part of the magnetic circuit, quasi-static and dynamic BH-loops were measured at various amplitudes by using an excitation winding and a measurement winding around the stator yoke of the PMSM. For field waveforms recorded in the 2-D FEM, the corresponding induction is calculated by a static Preisach model. The dynamic field is added based on the theory of loss separation. The test pulses cause minor hysteresis loops. Measurements and simulations show that losses due to the test pulses are usually small and have the same order of magnitude in the permanent magnets and the yoke.Keywords
This publication has 5 references indexed in Scilit:
- Analysis of the Local Material Degradation Near Cutting Edges of Electrical Steel SheetsIEEE Transactions on Magnetics, 2008
- A Simplified Iron Loss Model for Laminated Magnetic CoresIEEE Transactions on Magnetics, 2008
- Effect of Axial Segmentation of Permanent Magnets on Rotor Loss in Modular Permanent-Magnet Brushless MachinesIEEE Transactions on Industry Applications, 2007
- A GENERAL DESCRIPTION OF HIGH-FREQUENCY POSITION ESTIMATORS FOR INTERIOR PERMANENT-MAGNET SYNCHRONOUS MOTORS2005
- Analysis of laminated cores through a directly coupled 2-D/1-D electromagnetic field formulationIEEE Transactions on Magnetics, 2002