Biomass Source Influence on Hydrogen Production through Pyrolysis and in Line Oxidative Steam Reforming
Open Access
- 10 June 2024
- journal article
- research article
- Published by Wiley in ChemSusChem
- Vol. 17 (20) , e202400325
Abstract
This study evaluates the potential of several biomasses differing in nature and composition for their valorization by pyrolysis and in line oxidative steam reforming. The first task involved the fast pyrolysis of the biomasses in a conical spouted bed reactor (CSBR) at 500 °C, in which product yields were analyzed in detail. Then, the oxidative steam reforming (OSR) of pyrolysis volatiles (gases and bio‐oil) was approached in a fluidized bed reactor (FBR). The reforming experiments were performed at 600 °C, with a steam/biomass (S/B) ratio of 3 and catalyst (Ni/Al2O3) space times of 7.5 and 20 gcat min gvol−1. Concerning equivalence ratio (ER), a value of 0.12 was selected to ensure autothermal operation. Remarkable differences were observed in H2 production depending on the type of biomass. Thus, pine wood led to a H2 production of 9.3 wt %. The lower productions obtained with rice husk (7.7 wt %) and orange peel (5.5 wt %) are associated with their higher ash and fixed carbon content, respectively, which limit the efficiency of biomass conversion to bio‐oil. However, in the case of the microalgae, the poor performance observed is because of the lower conversion in the reforming step toward gases due to the composition of its pyrolysis volatile stream.Keywords
Funding Information
- Eusko Jaurlaritza
This publication has 86 references indexed in Scilit:
- Conversion of HDPE into Value Products by Fast Pyrolysis Using FCC Spent Catalysts in a Fountain Confined Conical Spouted Bed ReactorChemSusChem, 2021
- Regeneration of NiAl2O4 spinel type catalysts used in the reforming of raw bio-oilApplied Catalysis B: Environment and Energy, 2018
- Reduction of tar generated during biomass gasification: A reviewBiomass and Bioenergy, 2018
- Catalytic steam reforming of the aqueous fraction of bio-oil using Ni-Ce/Mg-Al catalystsApplied Catalysis B: Environment and Energy, 2017
- Steam reforming of cyclic model compounds of bio-oil over Ni-based catalysts: Product distribution and carbon formationApplied Catalysis B: Environment and Energy, 2015
- Flash pyrolysis of forestry residues from the Portuguese Central Inland Region within the framework of the BioREFINA-Ter projectBioresource Technology, 2013
- Review of fast pyrolysis of biomass and product upgradingBiomass and Bioenergy, 2012
- Two-stage steam gasification of waste biomass in fluidized bed at low temperature: Parametric investigations and performance optimizationBioresource Technology, 2011
- Hydrodynamics of Conical Spouted Beds Using Different Types of Internal DevicesChemical Engineering & Technology, 2009
- Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalystsApplied Catalysis B: Environment and Energy, 2005