Design of Permanent-Magnet Linear Generators with Constant-Torque-Angle Control for Wave Power
Open Access
Abstract
This paper presents a simulation method for direct-drive permanent-magnet linear generators designed for wave power. Analytical derivations of power and maximum damping force are performed based on Faraday’s law of induction and circuit equations for constant-torque-angle control. Knowledge of the machine reactance or the load angle is not needed. An aim of the simulation method is to simplify comparison of the maximum damping force, losses, and cost between different generator designs at an early design stage. A parameter study in MATLAB based on the derived equations is performed and the effect of changing different generator parameters is studied. The analytical calculations are verified with finite element method (FEM) simulations and experiments. An important conclusion is that the copper losses and the maximum damping force are mainly dependent on the rated current density and end winding length. The copper losses are inherently large in a slow-moving machine so special consideration should be taken to decrease the end winding length. It is concluded that the design of the generator becomes a trade-off between material cost versus high efficiency and high maximum damping force.Keywords
Funding Information
- Energimyndigheten (42243-1)
- Carl Tryggers Stiftelse för Vetenskaplig Forskning (15:152)
- STandUP for Energy (-)
This publication has 24 references indexed in Scilit:
- Cost-Based Design and Selection of Point Absorber Devices for the Mediterranean SeaEnergies, 2018
- Study of an Altered Magnetic Circuit of a Permanent Magnet Linear Generator for Wave PowerEnergies, 2017
- Partial Stator Overlap in a Linear Generator for Wave Power: An Experimental StudyJournal of Marine Science and Engineering, 2017
- Performance and design optimization of two model based wave energy permanent magnet linear generatorsRenewable Energy, 2017
- Control, power and electrical components in wave energy conversion systems: A review of the technologiesRenewable and Sustainable Energy Reviews, 2017
- Study of the operation characteristics of a point absorbing direct driven permanent magnet linear generator deployed in the Baltic SeaIET Renewable Power Generation, 2016
- Optimisation of a tubular linear machine with permanent magnets for wave energy extractionCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2011
- Design and Testing of a Linear Generator for Wave-Energy ApplicationsIEEE Transactions on Industrial Electronics, 2011
- Study of a longitudinal flux permanent magnet linear generator for wave energy convertersInternational Journal of Energy Research, 2006
- Linear PM Generator System for Wave Energy Conversion in the AWSIEEE Transactions on Energy Conversion, 2004