Finite element simulations on void closure behaviour inside the sheet during sheet rolling processes
Authors:
- 1 September 2002
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 216 (9) , 1227-1237
Abstract
The purpose of this paper is to explore the deformation mechanism of voids and stress-strain distributions around internal voids inside the sheet during sheet rolling processes. The plastic deformation and flow pattern of sheets during sheet rolling were simulated by the finite element method. The influences of various rolling conditions, such as the thickness reduction, the dimension of the internal void, friction factor, cross-sectional area of the void, etc., on the dimension of the void at the exit are discussed. The critical thickness reductions, over which the void would close completely, were also investigated. Furthermore, experiments on sheet rolling with an internal void inside the sheet were conducted. Theoretical predictions of the dimension of voids after rolling were compared with experimental results and relatively good agreement between them was found. Clearly, these analytical results can provide useful knowledge for designing the pass-schedule of sheet rolling processes for eliminating internal voids.Keywords
This publication has 10 references indexed in Scilit:
- A study of pore closure and welding in hot rolling processJournal of Materials Processing Technology, 1996
- Simulation of the behaviour of voids in steel plates during hot rollingSteel Research, 1995
- Analysis of void closure in open-die forgingInternational Journal of Machine Tools and Manufacture, 1990
- Metal Forming and the Finite-Element Method1989
- Influence of spread and stress on the closure of a central longitudinal hole in the hot rolling of steelJournal of Materials Processing Technology, 1986
- FINITE ELEMENT SIMULATION OP INTERNAL VOID CLOSURE IN OPEN-DIE PRESS FORGINGAdvanced Manufacturing Processes, 1986
- Closing of a central longitudinal pore in hot rollingJournal of Materials Processing Technology, 1985
- Influence of pressure on the closure of voids during plastic deformationJournal of Materials Processing Technology, 1980
- A study of void closure during plastic deformationJournal of Materials Processing Technology, 1980
- Influence of Flow Stress and Friction Upon Metal Flow in Upset Forging of Rings and CylindersJournal of Engineering for Industry, 1972