Increasing Deformation Energy Absorption of AM Drone Fuselages Using a Low-Density Polymeric Material
Open Access
- 25 June 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7164
Abstract
This study investigates the potential of low-density polymeric materials to enhance the deformation energy absorption of drone fuselage components manufactured using fused filament fabrication (FFF). Two materials—PLA (polylactic acid) and LW-PLA (lightweight polylactic acid)—were selected based on their accessibility, printability, and prior mechanical characterizations. While PLA is widely used in additive manufacturing, its brittleness limits its suitability for components subjected to accidental or impact loads. In contrast, LW-PLA exhibits greater ductility and energy absorption, making it a promising alternative where weight reduction is critical and structural redundancy is available. To evaluate the structural efficiency, a simplified analysis scenario was developed using a theoretical 300 J collision energy, not as a design condition, but as a comparative benchmark for assessing the performance of various metastructural configurations. The experimental results demonstrate that a stiffening core of the LW-PLA metastructure can reduce the component weight by over 60% while maintaining or improving the deformation energy absorption. Modified prototypes with hybrid internal structures demonstrated stable performances under repeated loading; however, the tests also revealed a buckling-like failure of the internal core in specific configurations, highlighting the need for core stabilization within metastructures to ensure reliable energy dissipation.Keywords
Funding Information
- Civil Engineering Research Centre (S-A-UEI-23-5, ŠMSM)
This publication has 41 references indexed in Scilit:
- Mono-material sandwich structures design produced by Foam Additive Manufacturing: study of performances under dynamic conditionsProgress in Additive Manufacturing, 2025
- Hybrid mechanical metamaterials: Advances of multi-functional mechanical metamaterials with simultaneous static and dynamic propertiesHeliyon, 2025
- Compressive behavior of additively manufactured lightweight structures: Infill density optimization based on energy absorption diagramsJournal of Materials Research and Technology, 2024
- Design of topology-optimized functionally graded porous structures under transient loadsInternational Journal of Mechanical Sciences, 2024
- Estimation and validation of elastic constants in fused filament fabrication 3D printing: From mesoscale to macroscaleMaterials & Design, 2024
- Quantifying the flexural stiffness changes in the concrete beams with externally bonded carbon fiber sheets under elevated environment temperatureAlexandria Engineering Journal, 2024
- Developing a lightweight hybrid profile concept with a steel shell and polymeric lattice core for optimal mechanical performanceComposite Structures, 2024
- Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recoveryThe International Journal of Advanced Manufacturing Technology, 2024
- Volumetric additive manufacturing: A new frontier in layer-less 3D printingAdditive Manufacturing, 2024
- Mechanical design and energy absorption of 3D novel hybrid lattice metamaterialsScience China Technological Sciences, 2021