Fracture behavior of mica‐reinforced polypropylene: Effects of coupling agent, flake orientation, and degradation
Authors:
- 1 August 1986
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 7 (4) , 219-226
Abstract
The effects of such factors as flake size, orientation, and surface treatment on the fracture mechanism of mica‐reinforced polypropylene were investigated. Concepts of post‐yield fracture mechanics were used to characterize the crack initiation and propagation resistances of the composite. It was found that better flake alignment slightly increases the yield strength but does not affect the crack growth resistance of the material. Flake size degradation during processing leads to an increased crack initiation resistance but reduces the tearing capacity and the maximum crack growth resistance of the composite, due to a reduction of the extent of matrix deformation. In the same manner, the use of a coupling agent diminishes the effect of matrix drawing and the total energy dissipated during the fracture process, even though the crack initiation resistance can be increased.Keywords
This publication has 11 references indexed in Scilit:
- The properties of mica‐filled polypropylenesPolymer Engineering & Science, 1984
- Factors affecting the mechanical properties of mica‐filled polypropylenesPolymer Engineering & Science, 1983
- Ultrasonically delaminated and coarse mica particles as reinforcements for polypropyleneJournal of Applied Polymer Science, 1982
- Hot‐rolling and forging of mica‐filled polyolefinsPolymer Composites, 1982
- The Theory of Instability of the Tearing Mode of Elastic-Plastic Crack Growth1979
- Mica reinforced polypropylenePolymer Engineering & Science, 1975
- Steel disc reinforced polycarbonateJournal of Materials Science, 1973
- The effect of flake aspect ratio on the flexural properties of mica reinforced plasticsPolymer Engineering & Science, 1973
- Some Further Results of J-Integral Analysis and Estimates1973
- On the strength and stiffness of planar reinforced plastic resinsPolymer Engineering & Science, 1970