A classification for the pressure-sensitivity properties of a sandstone rock frame
Author:
- 1 January 2004
- journal article
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 69 (2) , 497-510
Abstract
A three-parameter formula is proposed to describe the sensitivity of the bulk modulus (κ) or shear rigidity (μ) for a sandstone rock frame under applied isotropic loading. The theoretical basis for this relation is the use of excess compliance as a pseudo function to describe all internal weaknesses in the rock, regardless of their origin. The law is fitted to 179 sets of laboratory measurements on unsaturated reservoir core and outcrop sandstones that have low to moderate porosity and a range of clay fractions and cementation. A stress index, defined to quantitatively rank the reservoir sands, indicates that laboratory-derived pressure sensitivity is highest (10% per MPa maximum) for the clean, moderate-porosity Paleocene sands from the Forties Formation and West of Shetlands, whereas the lower-porosity, cemented, and more-consolidated Permian sands rank as least pressure sensitive (1% per MPa maximum). Higher-porosity sands are stress sensitive because of the overall rock-frame compressibility. All of the sands appear to contain microcracks induced by core unloading, with some harder rocks being more susceptible to this damage. Theory predicts, and laboratory data confirm, that VP/VS generally increases with pressure, although a small proportion of the samples do show the opposite trend. The sign and magnitude of the pressure sensitivity for η [(VS/VP)2] may relate to the intensity of the microcracking in the samples.Keywords
This publication has 19 references indexed in Scilit:
- An approximation for the Xu-White velocity modelGeophysics, 2002
- Overpressure detection from compressional‐ and shear‐wave dataGeophysical Research Letters, 1999
- 7. Laboratory Simulation of the Influence of Earth Stress Changes on Wave Velocities1996
- Ultrasonic compressional and shear velocities in dry clastic rocks as a function of porosity, clay content, and confining pressureGeophysical Journal International, 1992
- Empirical relationships among seismic velocity, effective pressure, porosity, and clay content in sandstoneGeophysics, 1989
- The Effective Elastic Moduli of Porous Granular RocksJournal of Applied Mechanics, 1981
- Inversion of seismic velocities for the pore aspect ratio spectrum of a rockJournal of Geophysical Research, 1979
- Elastic properties of unconsolidated porous sand reservoirsGeophysics, 1977
- Fluid saturation effects on dynamic elastic properties of sedimentary rocksGeophysics, 1976
- Elastic Wave Velocities in Granular SoilsJournal of the Soil Mechanics and Foundations Division, 1963