Enriched contact finite elements for stable peeling computations
- 24 January 2011
- journal article
- research article
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 87 (6) , 593-616
Abstract
During peeling of a soft elastic strip from a substrate, strong adhesional forces act locally inside the peeling zone. It is shown here that when a standard contact finite element (FE) formulation is used to compute the peeling process, a large mesh refinement is required since the numerical solution procedure becomes unstable otherwise. To improve this situation, several different efficient enrichment strategies are presented that provide stable solution algorithms for comparably coarse meshes. The enrichment is based on the introduction of additional unknowns inside the contact elements discretizing the slave surface. These are chosen in order to improve the approximation of the peeling forces, while keeping the overall number of degrees of freedom low. If needed, these additional unknowns can be condensed out locally. The enrichment formulation is developed for both 2D and 3D nonlinear FE formulations. The new enrichment technique is applied to the peeling computation of a gecko spatula. The proposed enriched contact element formulations are also investigated in sliding computations. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 32 references indexed in Scilit:
- Modeling of mixed-mode debonding in the peel test applied to superficial reinforcementsInternational Journal of Solids and Structures, 2008
- On using a penalty-based cohesive-zone finite element approach, Part I: Elastic solution benchmarksInternational Journal of Adhesion and Adhesives, 2008
- A segment-to-segment mortar contact method for quadratic elements and large deformationsComputer Methods in Applied Mechanics and Engineering, 2008
- A contact mechanics model for quasi‐continuaInternational Journal for Numerical Methods in Engineering, 2007
- Computational Contact Mechanics2006
- Adaptive hierarchical enrichment for delamination fracture using a decohesive zone modelInternational Journal for Numerical Methods in Engineering, 2002
- Arbitrary discontinuities in finite elementsInternational Journal for Numerical Methods in Engineering, 2001
- Interface strength, work of adhesion and plasticity in the peel testInternational Journal of Fracture, 1998
- Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modesInternational Journal for Numerical Methods in Engineering, 1992
- Rigid contact modelled by CAD surfaceEngineering Computations, 1990