Validation of a dynamic wheel load factor and the influence of various track irregularities on the dynamic response of prestressed concrete sleepers
- 9 December 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 234 (10) , 1275-1284
Abstract
Prestressed concrete sleepers are generally designed taking into account the influence of the dynamic wheel load. In Japan, the dynamic wheel load factor of 2.0 has been typically used for the serviceability limit state since the 1950s. However, there are few examples that have proved its validity. In this study, field measurement tests and three-dimensional numerical analysis were conducted for prestressed concrete sleepers laid on a straight section of a railway track with continuously welded rails. According to the results of the field tests, the measured dynamic wheel load factor was less than the conventionally used dynamic wheel load factor of 2.0, and the bending moments exceeding the full prestress condition, i.e. the compressive stress on all sections, were generated in some cases. Furthermore, even with the prestressed concrete sleepers of the same type laid continuously, the bending moment was increased more than three times due to the support conditions of the prestressed concrete sleepers and the rail roughness. Results of the numerical analyses also revealed that the bending moment was increased more than two times because of the hanging (unsupported) sleepers, and the tensile stress of the prestressed concrete sleeper exceeded 3 N/mm2 when the rail roughness was approximately 2 mm or more. Based on this investigation, the validity of the dynamic wheel load factor of 2.0 was proved.Keywords
This publication has 15 references indexed in Scilit:
- Evaluation of dynamic and impact wheel load factors and their application in design processesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016
- Reliability-based conversion of a structural design code for railway prestressed concrete sleepersProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Simulation of a Shinkansen train on the railway structure during an earthquakeJapan Journal of Industrial and Applied Mathematics, 2011
- An investigation of sleeper voids using a flexible track model integrated with railway multi-body dynamicsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2009
- NONLINEAR TRANSIENT ANALYSIS OF A RAILWAY CONCRETE SLEEPER IN A TRACK SYSTEMInternational Journal of Structural Stability and Dynamics, 2008
- A review of loading conditions for railway track structures due to train and track vertical interactionStructural Control and Health Monitoring, 2008
- Field trials for dynamic characteristics of railway track and its components using impact excitation techniqueNDT & E International, 2007
- Investigation of free vibrations of voided concrete sleepers in railway track systemProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- EFFECT OF IMPROPER BALLAST PACKING/TAMPING ON DYNAMIC BEHAVIORS OF ON-TRACK RAILWAY CONCRETE SLEEPERInternational Journal of Structural Stability and Dynamics, 2007
- Simulation and visualization of a high-speed Shinkansen train on the railway structureJapan Journal of Industrial and Applied Mathematics, 2000