Rubber Aggregate Concrete with Enhanced Damping Performance for Mass Concrete Applications
Open Access
Abstract
Mass concrete structures are subjected to long-term dynamic excitations, yet traditional concrete lacks the damping needed for effective vibration control. Rubber aggregate concrete has shown promise for vibration mitigation, but how rubber particle size and replacement ratio govern damping mechanisms and thermal performance in mass concrete remains unclear. Here we study rubber aggregate concrete with two particle sizes (40-mesh and 100-mesh) at 5%, 10%, and 20% sand replacement, combining mechanical, thermal, and dynamic testing with multi-scale microstructural characterization including FTIR, MIP, and nanoindentation. The damping ratio increased by up to 110% (from 1.43% to 3.01%), the adiabatic temperature rise decreased by 32%, and the linear expansion coefficient by 88%. Three damping mechanisms were identified: rubber viscoelasticity, interfacial friction at the weak rubber–mortar interface, and pore and micro-crack energy dissipation. Finer 100-mesh rubber outperformed coarser 40-mesh at higher replacement ratios due to a micro-filler effect that refined pore structure. RC-20-100 achieved 26.6 MPa at 90 days, adequate for non-primary structural elements. We recommend 20% fine rubber as the optimal balance of high damping, thermal crack mitigation, and adequate strength for vibration-controlled mass concrete applications.Keywords
Funding Information
- A Study on the Performance of Large-Volume Concrete Optimized with Micro-Vibration-Resistant Materials (JCZKY2406)
This publication has 40 references indexed in Scilit:
- Mechanical and Vibration Properties of Self-compacting Rubberized Concrete Beams with Silica Fume EnhancementIranian Journal of Science and Technology, Transactions of Civil Engineering, 2024
- Experimental investigation into the properties of crumb rubberized concrete incorporating corrugated round steel fibersArchives of Civil and Mechanical Engineering, 2024
- Damping of rubberized recycled aggregate concrete and damping estimation of its elements by finite element analysisComposite Structures, 2022
- Evaluation of microcracks in the interfacial transition zone of recycled rubber concreteStructural Concrete, 2019
- Recycling fresh concrete waste: A reviewStructural Concrete, 2018
- Physico-mechanical, microstructural and dynamic properties of newly developed artificial fly ash based lightweight aggregate – Rubber concrete compositeComposites Part B: Engineering, 2015
- Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregateConstruction and Building Materials, 2014
- Mechanical properties and constitutive equations of concrete containing a low volume of tire rubber particlesConstruction and Building Materials, 2014
- Recycling of waste tire rubber in asphalt and portland cement concrete: An overviewConstruction and Building Materials, 2014
- Rubberized concrete: A green structural material with enhanced energy-dissipation capabilityConstruction and Building Materials, 2013