Predictive path-accurate scaling of a sensor-based defined trajectory
Authors:
- 1 May 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 754-759
Abstract
The paper considers an a priori given robot trajectory which has to be recomputed when online sensed information on the environment is available. Then the original trajectory is adapted in order to continue the so far commanded motion by the sensed geometric shape. The adapted trajectory has to comply with restrictions on velocity, acceleration and jerk. Furthermore it is desired to converge to the original trajectory. At least if the robot is in contact with the environment it is further essential that the geometrical path is not left when modifying the trajectory. This means that preferably only the temporal profile is changed by scaling or rescaling the velocity. In order to inhibit overshooting, future restrictions are predicted and backtracked in the case of a violation. All this computation is done within a single sampling step, i.e. within 4 ms for a standard KUKA industrial robot. This precludes accurate optimization algorithms. When applied without an a priori given trajectory the method results in an near time-optimal solution.Keywords
This publication has 17 references indexed in Scilit:
- Force and trajectory control of industrial robots in stiff contact2013
- Techniques to preserve the stability of a trajectory scaling algorithm2013
- Near Time-Optimal Control of Redundant Manipulators along a Specified Path with Jerks ConstraintAdvanced Robotics, 2011
- Calculating a near time-optimal jerk-constrained trajectory along a specified smooth pathThe International Journal of Advanced Manufacturing Technology, 2009
- Torque limited path following by on-line trajectory time scaling2003
- High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolationInternational Journal of Machine Tools and Manufacture, 2001
- A Practical Approach to Near Time-Optimal Inspection-Task-Sequence Planning for Two Cooperative Industrial Robot ArmsThe International Journal of Robotics Research, 1998
- Computation of Path Constrained Time Optimal Motions With Dynamic SingularitiesJournal of Dynamic Systems, Measurement, and Control, 1992
- On line motion generation with velocity and acceleration constraintsRobotics and Autonomous Systems, 1989
- On-line robot trajectory control in joint coordinates by means of imposed acceleration profilesRobotica, 1988