Characterisation of Calcium- and Phosphorus-Enriched Porous Coatings on CP Titanium Grade 2 Fabricated by Plasma Electrolytic Oxidation
Open Access
Abstract
In the paper, Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), X-ray Photoelectron Spectroscopy (XPS), and Glow Discharge Optical Emission Spectroscopy (GDOES) analyses of calcium- and phosphorus-enriched coatings obtained on commercial purity (CP) Titanium Grade 2 by plasma electrolytic oxidation (PEO), known also as micro arc oxidation (MAO), in electrolytes based on concentrated phosphoric acid with calcium nitrate tetrahydrate, are presented. The preliminary studies were performed in electrolytes containing 10, 300, and 600 g/L of calcium nitrate tetrahydrate, whereas for the main research the solution contained 500 g/L of the same hydrated salt. It was found that non-porous coatings, with very small amounts of calcium and phosphorus in them, were formed in the solution with 10 g/L Ca(NO3)2·4H2O, whereas the other coatings, fabricated in the consecutive electrolytes containing from 300 up to 650 g/L Ca(NO3)2·4H2O, were porous. Based on the GDOES data, it was also found that the obtained porous PEO coating may be divided into three sub-layers: the first, top, porous layer was the thinnest; the second, semi-porous layer was about 12 times thicker than the first; and the third, transition sub-layer was about 10 times thicker than the first. Based on the recorded XPS spectra, it was possible to state that the top 10-nm layer of porous PEO coatings included chemical compounds containing titanium (Ti4+), calcium (Ca2+), as well as phosphorus and oxygen (PO43− and/or HPO42− and/or H2PO4−, and/or P2O74−).Keywords
This publication has 62 references indexed in Scilit:
- XPS and GDOES Characterization of Porous Coating Enriched with Copper and Calcium Obtained on Tantalum via Plasma Electrolytic OxidationJournal of Spectroscopy, 2016
- Achieving surface chemical and morphologic alterations on tantalum by plasma electrolytic oxidationInternational Journal of Implant Dentistry, 2016
- Functional coatings formed on the titanium and magnesium alloys as implant materials by plasma electrolytic oxidation technology: fundamental principles and synthesis conditionsCorrosion Reviews, 2015
- Characteristics of porous biocompatible coatings obtained on Niobium and Titanium-Niobium-Zirconium (TNZ) alloy by Plasma Electrolytic OxidationMechanik, 2015
- Modification of tantalum surface via plasma electrolytic oxidation in silicate solutionsElectrochimica Acta, 2013
- SEM/EDX and XPS studies of niobium after electropolishingApplied Surface Science, 2012
- Plasma electrolytic oxidation of tantalumSerbian Journal of Electrical Engineering, 2012
- Characterization of passive films formed on titanium during anodic oxidationElectrochimica Acta, 2011
- Characterization of oxide coatings formed on tantalum by plasma electrolytic oxidation in 12-tungstosilicic acidApplied Surface Science, 2011
- Spectroscopic and real-time imaging investigation of tantalum plasma electrolytic oxidation (PEO)Surface and Coatings Technology, 2011