High-frequency permeability of (Fe, Co, Ni)62Nb8B30 amorphous alloys with a wide supercooled liquid region
Authors:
- 26 April 1999
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 74 (17) , 2510-2512
Abstract
The increase in B content to 30 at. % for Fe–Co–Ni–Nb–B amorphous alloys caused an extension of a supercooled liquid region before crystallization, and a wide supercooled liquid region greater than 80 K was obtained in a wide composition range of 5–42 at. % Co and 0–10 at. % Ni for Fe62−x−yCoxNiyNb8B30 amorphous alloys. High B-containing amorphous alloys with low Ni content below 10 at. % have high electrical resistivity above 230 μΩ cm and exhibit good soft magnetic properties, i.e., a low coercive force of 2 A/m, low saturated magnetostriction of 2–7×10−6, and high permeability of 21 000–29 300 at 1 kHz and 5000–7500 at 1 MHz. The high-frequency permeability characteristics at 1 MHz are much better than those for any kind of soft magnetic materials, and have been presumed to result from the decrease in eddy current loss caused by the increase in electrical resistivity. The synthesis of the Fe–Co–Nb–B amorphous alloys exhibiting a wide supercooled liquid region greater than 80 K and high-frequency permeability of 7500 at 1 MHz is promising for future development as a type of soft magnetic material.Keywords
This publication has 17 references indexed in Scilit:
- Ferromagnetic bulk amorphous alloysMetallurgical and Materials Transactions A, 1998
- Bulk amorphous alloys with soft and hard magnetic propertiesMaterials Science and Engineering: A, 1997
- Preparation of Bulk Glassy Pd40Ni10Cu30P20 Alloy of 40 mm in Diameter by Water QuenchingMaterials Transactions, JIM, 1996
- Slowly-Cooled Bulk Amorphous AlloysMaterials Science Forum, 1995
- High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates (Overview)Materials Transactions, JIM, 1995
- Mechanical strength and thermal stability of Ti-based amorphous alloys with large glass-forming abilityMaterials Science and Engineering: A, 1994
- A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5Applied Physics Letters, 1993
- Zr–Al–Ni Amorphous Alloys with High Glass Transition Temperature and Significant Supercooled Liquid RegionMaterials Transactions, JIM, 1990
- Al–La–Ni Amorphous Alloys with a Wide Supercooled Liquid RegionMaterials Transactions, JIM, 1989
- New Amorphous Mg-Ce-Ni Alloys with High Strength and Good DuctilityJapanese Journal of Applied Physics, 1988