Flexural Behavior of an RC Beam Externally Strengthened with a Steel- and CFRP-Based Method
Open Access
- 12 October 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (20) , 9281
Abstract
Reinforced concrete beam bridges are usually retrofitted by a steel plate or FRP. However, these two methods tend to result in disadvantages, e.g., construction complexity and debonding failure, owing to the corresponding material properties. In this study, a steel- and CFRP-based method is proposed to achieve the merits of typical retrofitting methods by combining a CFRP plate, a steel plate, and angle steel. To investigate the effect of the cooperative strengthening, six full-scale beam specimens were designed and are evaluated through a monotonic four-point bending test. The failure mode, load–deflection relationship, critical parameters, and crack development are systematically and sequentially analyzed. Finally, a predicting method is proposed to calculate the flexural capacity. The retrofitted beam is characterized by an acceptable load-bearing capacity and deformation capacity. With continuous retrofitting, the crack load and ultimate load can be improved up to 84.9% and 4.41 times, respectively. The steel plate and angle steel function in both the load bearing and the anchorage to the CFRP plate contributes more to the ultimate bearing capacity after the steel components yield. Finally, a calculating model is shown to accurately predict the ultimate bearing capacity after retrofitting, with an average error of 4.03%.Keywords
Funding Information
- National Natural Science Foundation of China (52378244, 52308257, BK20231293, BK20230399, 23KJB560019)
- Natural Science Foundation of Jiangsu Province (52378244, 52308257, BK20231293, BK20230399, 23KJB560019)
- Natural Science Foundation of the Higher Education Institutions of Jiangsu Province (52378244, 52308257, BK20231293, BK20230399, 23KJB560019)
This publication has 43 references indexed in Scilit:
- The Response of Angle Steel Skeleton-Reinforced Concrete Beams to Low-Cycle and Static LoadsKSCE Journal of Civil Engineering, 2024
- Experimental study on concrete-filled steel tube columns with inner distributed seawater and sea sand concrete-filled fiber-reinforced polymer tubes under axial compressionComposite Structures, 2023
- Influence of corrosion effects on the seismic capacity of existing RC bridgesEngineering Failure Analysis, 2022
- A data‐driven approach for regional bridge condition assessment using inspection reportsStructural Control and Health Monitoring, 2021
- Design of ductile H-anchorage for strengthening reinforced concrete beams with prestressed FRPConstruction and Building Materials, 2021
- Experimental study of hybrid strengthening technique using carbon fiber laminates and steel plates for reinforced concrete slabsConstruction and Building Materials, 2019
- Design method and verification of steel plate anchorages for FRP-to-concrete bonded interfacesComposite Structures, 2018
- Experimental study on the effect of anchorage systems on RC beams strengthened using FRPComposites Part B: Engineering, 2016
- An experimental study on reinforced concrete beams strengthened with prestressed near surface mounted CFRP stripsEngineering Structures, 2014
- Steel plate contribution to load-carrying capacity of retrofitted RC beamsConstruction and Building Materials, 2008