Creep-Fatigue Failure Diagnosis
Open Access
- 16 November 2015
- Vol. 8 (11) , 7757-7769
Abstract
Failure diagnosis invariably involves consideration of both associated material condition and the results of a mechanical analysis of prior operating history. This Review focuses on these aspects with particular reference to creep-fatigue failure diagnosis. Creep-fatigue cracking can be due to a spectrum of loading conditions ranging from pure cyclic to mainly steady loading with infrequent off-load transients. These require a range of mechanical analysis approaches, a number of which are reviewed. The microstructural information revealing material condition can vary with alloy class. In practice, the detail of the consequent cracking mechanism(s) can be camouflaged by oxidation at high temperatures, although the presence of oxide on fracture surfaces can be used to date events leading to failure. Routine laboratory specimen post-test examination is strongly recommended to characterise the detail of deformation and damage accumulation under known and well-controlled loading conditions to improve the effectiveness and efficiency of failure diagnosis.Keywords
This publication has 16 references indexed in Scilit:
- Creep–fatigue crack development from short crack startersMaterials at High Temperatures, 2014
- Effect of prior cyclic damage removal on high temperature low cycle fatigue enduranceProcedia Engineering, 2010
- Cyclic Slip Irreversibilities and the Evolution of Fatigue DamageMetallurgical and Materials Transactions A, 2009
- Creep-Fatigue Interactions in a 9 Pct Cr-1 Pct Mo Martensitic Steel: Part II. Microstructural EvolutionsMetallurgical and Materials Transactions A, 2008
- Creep – fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanismsMaterials at High Temperatures, 2008
- Creep damage zone development in advanced 9%Cr steel weldmentsInternational Journal of Pressure Vessels and Piping, 2001
- Constitutive behavior and crack tip fields for materials undergoing creep-constrained grain boundary cavitationActa Metallurgica, 1983
- Oxide characterization for service failure investigationsCorrosion Science, 1981
- A QUANTITATIVE METALLOGRAPHIC ASSESSMENT OF STRUCTURAL DEGRADATION OF TYPE 316 STAINLESS STEEL DURING CREEP-FATIGUEFatigue & Fracture of Engineering Materials & Structures, 1980
- The influence of environment and stress ratio on fatigue crack growth at near threshold stress intensities in low-alloy steelsEngineering Fracture Mechanics, 1980