Hierarchically porous carbon supports enable efficient syngas production in electrified reactive capture
Open Access
- 29 May 2025
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (13) , 6628-6640
Abstract
Direct-air capture (DAC) of CO2 often uses alkali hydroxides (e.g. KOH) as sorbent, and relies on an energy-intensive thermal CaCO3/Ca(OH)2 step to release CO2 and regenerate the alkali hydroxide. Reactive capture instead uses alkali carbonate post-capture liquid as feedstock, seeking to convert the captured CO2 to value-added products while regenerating the capture liquid. Here we investigate the origins of low prior performance in electrochemical reactive capture systems, finding that the catalyst becomes starved of CO2 even at moderate current densities leading to a rapid decline in faradaic efficiency (FE). We then study how the catalyst support can be redesigned to tackle this problem, and construct hierarchical carbon supports featuring interconnected mesopores and micropores, our purpose to increase the interaction between in situ generated CO2, i-CO2 – the limiting reagent – and the catalyst. We find that the attachment chemistry of the catalyst to the support is critical: only when we disperse and tether the molecular catalyst do we prevent catalyst aggregation and deactivation under bias. We report as a result carbonate electrolysis at 200 mA cm−2 at 2.9 V with FE of 47 ± 1% for CO, this corresponding to an energy efficiency (EE) to 2 : 1 syngas of 50% at 200 mA cm−2 when H2 is added using a water electrolyzer. This represents a 1.5× improvement in EE at this current density relative to the most efficient prior carbonate electrolysis reports. The CO FE remains above 40% at current densities as high as 500 mA cm−2, and all systems studied herein achieve < 1% CO2 in the outlet stream. The cradle-to-gate carbon intensity is lowered to −1.49 tonCO2 per tonsyngas as a result of the increase in EE, and a CO2-free tailgas stream is provided that minimizes separation costs.Keywords
Funding Information
- Saudi Aramco
- National Research Foundation of Korea (RS-2023-00253850)
This publication has 50 references indexed in Scilit:
- Kinetics and mechanism of heterogeneous voltage-driven water-dissociation catalysisJoule, 2023
- CO2 electroreduction to multicarbon products from carbonate capture liquidJoule, 2023
- Bicarbonate Electroreduction to Multicarbon Products Enabled by Cu/Ag Bilayer Electrodes and Tailored MicroenviromentsChemSusChem, 2022
- Considering the Influence of Polymer–Catalyst Interactions on the Chemical Microenvironment of Electrocatalysts for the CO2 Reduction ReactionAccounts of Chemical Research, 2022
- Techno-economic assessment of CO2 direct air capture plantsJournal of Cleaner Production, 2019
- A Process for Capturing CO2 from the AtmosphereJoule, 2018
- Electrochemical Reduction of Carbon Dioxide in a Monoethanolamine Capture MediumChemSusChem, 2017
- Bimetallic (FexNi1−x)2P nanoarrays as exceptionally efficient electrocatalysts for oxygen evolution in alkaline and neutral mediaNano Energy, 2017
- Semiempirical GGA‐type density functional constructed with a long‐range dispersion correctionJournal of Computational Chemistry, 2006
- Raman spectro‐electrochemistry. II. In situ raman spectroscopic studies of the electrochemical reduction of CO2 at cobalt(II) phthalocyanine‐impregnated PTFE‐bonded carbon gas diffusion electrodesJournal of Raman Spectroscopy, 1987