Three-Dimensional Printed mm-Wave Circularly Polarized Filtering Antenna With Flexible Design and Spurious Suppression
- 23 June 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (10) , 8266-8271
Abstract
In this communication, a 3-D printed circularly polarized (CP) filtering antenna with spurious suppression for 5G mm-wave applications is presented. First, a composite resonator, serving as both the last-stage resonator of a waveguide filter and an aperture antenna, is utilized to realize a filtering linearly polarized (LP) antenna. The 4 th -order electric cross-coupling topology is employed to generate two radiation nulls at both sides of the passband, enhancing the selectivity. Then, a polarizer is presented and placed in front of the LP antenna to obtain the CP radiation. The operating principles of the polarizer are analyzed in detail, which features flexible size and insensitivity to the original filtering response. To demonstrate the concept, three filtering CP antennas with different polarizer dimensions are designed, exhibiting similar responses. After that, to suppress spurious modes and extend the spurious-free region, the defected ground structures (DGSs) are introduced. Finally, all three CP antennas are fabricated using 3-D printing and tested. Measured results show that 10 dB return loss and 3 dB AR bandwidths for all antennas are about 7% and 9%, respectively.Keywords
Funding Information
- International Cooperation Funds of Shanxi Province (2022KWZ-15)
- National Natural Science Foundation of China (62171363)
- Hongque Innovation Center Funds (202203)
- Shaanxi Key Laboratory (2021SYS-04)
- Shaanxi S and T Innovation Team (2023-CX-TD-03)
This publication has 22 references indexed in Scilit:
- A Design of Bandwidth-Enhanced Cavity-Backed Slot Filtenna Using Resonance WindowsIEEE Transactions on Antennas and Propagation, 2018
- Millimeter-Wave Multibeam Endfire Dual-Circularly Polarized Antenna Array for 5G Wireless ApplicationsIEEE Transactions on Antennas and Propagation, 2018
- Compact and Low-Cost 3-D Printed Antennas Metalized Using Spray-Coating Technology for 5G mm-Wave Communication SystemsIEEE Antennas and Wireless Propagation Letters, 2018
- A Circularly Polarized Cavity-Backed Slot Antenna With Enhanced Radiation GainIEEE Antennas and Wireless Propagation Letters, 2018
- Reconfigurable Linear/Circular Polarization Rectangular Waveguide FiltennaIEEE Transactions on Antennas and Propagation, 2017
- Circularly Polarized Waveguide Antenna With Dual Pairs of Radiation Slots at Ka-BandIEEE Antennas and Wireless Propagation Letters, 2017
- X-Band Waveguide Filtering Antenna Array With Nonuniform Feed StructureIEEE Transactions on Microwave Theory and Techniques, 2017
- High-Gain and Wide-Bandwidth Filtering Planar Antenna Array-Based Solely on ResonatorsIEEE Transactions on Antennas and Propagation, 2017
- A Wideband Millimeter-Wave Circularly Polarized Antenna With 3-D Printed PolarizerIEEE Transactions on Antennas and Propagation, 2017
- 5G Mobile: Spectrum Broadening to Higher-Frequency Bands to Support High Data RatesIEEE Vehicular Technology Magazine, 2014