Influence of Ethylene Plasma Treatment of Agave Fiber on the Cellular Morphology and Compressive Properties of Low-Density Polyethylene/Ethylene Vinyl Acetate Copolymer/Agave Fiber Composite Foams
Authors:
- Florentino Soriano‐CorralFSFlorentino Soriano‐Corral
- L. A. Calva-NavaLCL. A. Calva-Nava
- José Francisco Hernández GámezJGJosé Francisco Hernández Gámez
- Ernesto Hernández‐HernándezEHErnesto Hernández‐Hernández
- Pablo González‐MoronesPGPablo González‐Morones
- Carlos Alberto Ávila‐OrtaCarlos Alberto Ávila‐Orta
- Gustavo Soria‐ArguelloGSGustavo Soria‐Arguello
- Heidi A. Fonseca‐FloridoHFHeidi A. Fonseca‐Florido
- Carlos Andrés Covarrubias‐GordilloCCCarlos Andrés Covarrubias‐Gordillo
- Ramón Díaz de LeónRamón Díaz de León
Open Access
- 25 March 2021
- journal article
- research article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2021, 1-13
Abstract
Agave fibers (AF) were incorporated either pristine (AFp) or surface treated by ethylene plasma (AFm) in low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) blends at a ratio of 1:1 and foamed by chemical means. The role of the AF content (3, 6, 9, 12, and 15wt.) and its surface modification on the cellular morphology and mechanical properties of LDPE/EVA/AF foams under compression is investigated herein. Fourier transform-infrared spectroscopy, contact angle, and water suspension of AF suggest that plasma treatment using ethylene successfully modifies the surface nature of AF from hydrophilic to hydrophobic. AF and the surface treatment have an important role on the morphological properties of the foams. Composite foams reinforced with 12wt. AFm exhibited the highest mechanical properties improvements. At this fiber content, the composite foams enhanced 30 of the compressive modulus and 23 of the energy absorption under compression with respect to the neat polymer blend foam, as a result to the formation of more uniform cells with smaller size and the enhancement of compatibility and spatial distribution of the AFm in the polymer composite foams due to thin clusters of polyethylene-like polymer deposited on the AF surface.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (294030, 232753)
This publication has 34 references indexed in Scilit:
- Morphology and properties of polystyrene/agave fiber composites and foamsJournal of Applied Polymer Science, 2012
- Effects of organic peroxide and polymer chain structure on morphology and thermal properties of sisal fibre reinforced polyethylene compositesComposites Part A: Applied Science and Manufacturing, 2012
- Mechanisms of Plasma Polymerization – Reviewed from a Chemical Point of ViewPlasma Processes and Polymers, 2011
- Surface Modification of Nanoclays by Plasma Polymerization of EthylenePlasma Processes and Polymers, 2011
- Effect of clay dispersion on the cell structure of LDPE/clay nanocomposite foamsPolymer Composites, 2011
- Morphology and tensile properties of crosslinked nanocomposite foams of low‐density polyethylene and poly(ethylene‐ co ‐vinyl acetate) blendsJournal of Vinyl and Additive Technology, 2010
- An investigation on the correlation between rheology and morphology of nanocomposite foams based on low‐density polyethylene and ethylene vinyl acetate blendsPolymer Composites, 2010
- Postconsumer high‐density polyethylene/agave fiber foamed composites coated with chitosan for the removal of heavy metalsJournal of Applied Polymer Science, 2009
- Comparative investigation of the macromolecular composition of mycelia forms Thielavia terrestris by infrared spectroscopyVibrational Spectroscopy, 1999
- Classification of Lignins from Different Botanical Origins by FT-IR SpectroscopyHolzforschung, 1991