Dynamic Response and Damage Characteristics of Large Reinforced Concrete Slabs under Explosion
Open Access
- 21 November 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12552
Abstract
To investigate the damage characteristics of reinforced concrete (RC) buildings during explosive incidents, a large RC slab (4 m × 5 m × 0.15 m) was meticulously designed, fabricated, and subjected to explosion experiments, which were complemented by comprehensive numerical simulations. The dynamic response parameters of the RC slabs under 0.5–1 kg TNT explosions were tested using polyvinylidene fluoride (PVDF) pressure sensors, displacement sensors, and acceleration sensors. The damage morphologies under 5–40 kg TNT explosions were investigated using ANSYS/LS–DYNA 17.0 software. The results show that, with an increase in TNT charge, the RC slab gradually showed minor damage (5 kg), moderate damage (10–20 kg), heavy damage (25 kg), and complete destruction (30–40 kg). For the 20 kg TNT explosion condition, a 1020 mm × 760 mm explosion crater appeared on the top surface, which was in agreement with the 934 mm × 906 mm explosion crater obtained from the simulation. Based on the results, suitable P–I (pressure–impulse) curves for the 4 m × 5 m × 0.15 m RC slab were established. The results can provide a reference for damage assessments of large-sized buildings during explosion accidents.Keywords
This publication has 20 references indexed in Scilit:
- Numerical and experimental study of externally reinforced RC slabs using FRPs subjected to close-in blast loads.International Journal of Impact Engineering, 2021
- Experimental investigation on the structural response of RC slabs subjected to combined fire and blastStructures, 2021
- Experimental studies on fragments of reinforced concrete slabs under close-in explosionsInternational Journal of Impact Engineering, 2020
- Experimental and numerical study on damage mode of RC slabs under combined blast and fragment loadingInternational Journal of Impact Engineering, 2020
- Experimental and numerical study on the dynamic response of RC slabs under blast loadingEngineering Failure Analysis, 2016
- Pressure–impulse diagrams for the behavior assessment of structural componentsInternational Journal of Impact Engineering, 2008
- Empirical Based Concrete Masonry Pressure-Impulse Diagrams for Varying Degrees of Damage2005
- Pulse loading shape effects on pressure–impulse diagram of an elastic–plastic, single-degree-of-freedom structural modelInternational Journal of Mechanical Sciences, 2002
- Pressure-Impulse Diagram for Blast Loads Based on Dimensional Analysis and Single-Degree-of-Freedom ModelJournal of Engineering Mechanics, 2002
- A plasticity concrete material model for DYNA3DInternational Journal of Impact Engineering, 1997