An overvoltage suppression scheme for AC motor drives using a half DC-link voltage level at each PWM transition
Authors:
- 7 August 2002
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 49 (3) , 549-557
Abstract
Passive filters are conventionally used to suppress overvoltage in the motor terminal, either by reducing the voltage rise rate at the inverter output, or by decreasing the motor terminal impedance. We propose an overvoltage suppression scheme that renders the use of passive filters unnecessary. This approach differs from general filter methods, in that it is independent,of d/spl upsi//dt and does not try to reduce d/spl upsi//dt. Our scheme utilizes the middle voltage level V/sub DC//2 at each pulsewidth modulation voltage transition, where V/sub DC/ represents the DC-link voltage. The duration of the middle voltage level is controlled in such a way that reflected voltages are cancelled out at the motor terminal. Optimal cancellation is achieved when the duration of V/sub DC//2 is equal to twice the transport delay of the cable. Further, if reflection coefficients at the motor terminal and the inverter output are equal to /spl plusmn/1, no overvoltage takes place. The proposed scheme requires the use of six auxiliary insulated gate bipolar transistor switches. Simulation as well as experimental results are presented here.Keywords
This publication has 10 references indexed in Scilit:
- Overvoltages in inverter fed induction machines using high frequency power electronic components2002
- Transient modeling and analysis of motor terminal voltage on PWM inverter-fed AC motor drives2002
- Reflected wave modeling techniques for PWM AC motor drives2002
- Design and implementation of an inverter output LC filter used for dv/dt reduction1999
- Output Filters for PWM Drives with Induction MotorsIEEE Industry Applications Magazine, 1998
- Transient effects of PWM drives on induction motorsIEEE Transactions on Industry Applications, 1997
- Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applicationsIEEE Transactions on Industry Applications, 1997
- Interaction of drive modulation and cable parameters on AC motor transientsIEEE Transactions on Industry Applications, 1997
- Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systemsIEEE Transactions on Industry Applications, 1996
- Transient effects in application of PWM inverters to induction motorsIEEE Transactions on Industry Applications, 1992