Physical and mechanical properties of Eucalyptus saligna wood for timber structures
Authors:
- Diego Henrique de AlmeidaDADiego Henrique de Almeida
- Victor Almeida de AraujoVictor Almeida de Araujo
- Juliano Souza VasconcelosJVJuliano Souza Vasconcelos
- André Luis ChristoforoAndré Luis Christoforo
- Tiago Hendrigo de AlmeidaTATiago Hendrigo de Almeida
- Francisco Antonio Rocco LahrFLFrancisco Antonio Rocco Lahr
Open Access
- 1 April 2019
- journal article
- artigos
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 19 (2) , 233-239
Abstract
Due to its great availability in planted forests in Brazil, Eucalyptus saligna appears as a good species to be exploited, in order to assist in the consumption of wood for construction purposes. The aim of this research was to determine the physical and mechanical properties of Eucalyptus saligna wood species for its use in civil construction. The evaluation was based on 16 physical and mechanical properties obtained according to NBR 7190 (1997) standard. Two values of moisture content were considered: 30% (above the fiber saturation point) and 12% (equilibrium moisture content) according to NBR 7190 (1997). All obtained results obtained were statistically analyzed according to the t-test at the 5% level of significance. In addition, the characteristic strength properties were also determined, for batch classification in the strength classes recommended by the Brazilian standard. Eucalyptus saligna had an apparent density of 0.58 g/cm3 and a basic density of 0.73 g/cm3. The mechanical properties, presented fc0 and fc0,k equal to 46.80 and 32 MPa, respectively. The results indicated that Eucalyptus saligna wood can be used in the construction of timber structures as structural memberKeywords
This publication has 23 references indexed in Scilit:
- Evaluation of the Effect of Drying and Rewetting Cycles in Eucalyptus PulpsInternational Journal of Engineering and Technology, 2015
- Biodeterioration of wood from two fast-growing eucalypts exposed to field testInternational Biodeterioration & Biodegradation, 2014
- Physical-Mechanical and Anatomical Characterization in 26-Year-Old Eucalyptus resinifera WoodFloresta e Ambiente, 2014
- Evaluation of the use potential of nine species of genus Eucalyptus for production of veneers and plywood panelsCERNE, 2013
- Desenvolvimento inicial e estado nutricional de clones de eucalipto no nordeste do ParáActa Amazonica, 2012
- Balanço de nutrientes em povoamento de Eucalyptus saligna implantado sobre Cambissolo Háplico no RSRevista Brasileira de Engenharia Agrícola E Ambiental, 2011
- Alterations in energy properties of eucalyptus wood and bark subjected to torrefaction: The potential of mass loss as a synthetic indicatorBioresource Technology, 2010
- Propriedades Físico-Mecânicas da Madeira de Eucalyptus urophylla S.T. Blake no Sentido Radial e LongitudinalRevista Ciência da Madeira - RCM, 2010
- Propriedades físico-mecânicas da madeira de canafístula aos 10 anos de idadeCiência Rural, 2010
- Deformações residuais longitudinais decorrentes de tensões de crescimento em eucaliptos e suas associações com outras propriedadesRevista Árvore, 2004