Spark Plasma Sintering of Copper-Niobium-Graphite Composites, and the Investigations of Their Microstructure and Properties
Open Access
Abstract
The microstructures and properties of ternary copper-niobium-graphite (Cu-Nb(nano)10-C4, and Cu-Nb(micron)10-C4) composites produced via spark plasma sintering (SPS) technique have been investigated for their potential use as electrical connection materials at high-temperature application. Nowadays, there is much activity in the development of such material all over the world. This study was aimed to compare the effect of adding the nano and micron particles sizes of Nb powders in the microstructures and properties of Cu-Nb-C composites sintered at 700 and 650 °C temperatures. The investigated materials have been produced via the SPS method. The microstructures were observed by electron microscopy technique, the wear test was observed by Anton-Paar TRB3 tribometer, thermal diffusivity was observed by LFA427 NETzschlaser flash device within the temperature of 100–900 °C, and the corrosion test was performed by potentiodynamic polarization. The discoveries have been presented in the manuscript and were discussed with reference to the microstructure development, the composite with nanoparticles sintered at 650 °C displayed closed thermal stabilities as temperature increased, and it recorded a low coefficient of friction and suitable corrosion resistance, which correspond to requirements for electrical contacting materials. The SPS method of production of the composites caused initial microstructure refinement and improved the properties of the composites.Keywords
Funding Information
- Department of science and technology (DST), South Africa (N/A, N/A)
This publication has 32 references indexed in Scilit:
- Microstructure and texture evolution of Cu–Nb composite wiresMaterials Characterization, 2013
- Investigation on Recrystallization of Cu-Nb Micro-composites by the Method of ResistancePhysics Procedia, 2013
- Synthesis and characterization of copper–alumina metal matrix composite by conventional and spark plasma sinteringJournal of Alloys and Compounds, 2012
- Structure evolution and solid solubility extension of copper–niobium powders during mechanical alloyingMaterials Science and Engineering: A, 2011
- Microstructure evolution and thermal stability of nanocrystalline Cu-Nb alloys during heat treatmentTransactions of Nonferrous Metals Society of China, 2009
- Phase selection in supercooled Cu–Nb alloysJournal of Materials Science, 2009
- Supersaturated solid solution of niobium in copper by mechanical alloyingJournal of Alloys and Compounds, 2003
- A study on preparation of copper–niobium composite by aluminothermic reduction of mixed oxidesJournal of Alloys and Compounds, 2002
- Liquidus temperatures and solidification behavior in the copper–niobium systemActa Materialia, 1998
- Structure and Mechanical Properties of Copper/Niobium MultilayersJournal of the American Ceramic Society, 1997