Nanoparticle-induced control (MWCNTs–TiO2) on grain size and tensile strength response and multi-response optimization on TIG welded joints
- 1 September 2022
- journal article
- research article
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 46 (3) , 626-638
Abstract
This study discusses the effectual variable parameters of multi-walled carbon nanotubes and titanium oxide (MWCNT–TiO2) contents and welding current in obtaining a response on mechanical behavior. The experimental work involved three levels of both parameters, which included 1, 1.5, and 2 wt.% of MWCNTs–TiO2 and 160, 180, and 200 A of current by forming a full design that represented a 32 (3 k) factorial model. The results of an analysis of variance (ANOVA) were critically employed to assess the variation between the variables and within their levels for approaching the significant combination of parameters. The joints welded with MWCNT–TiO2-coated fillers tendered a significant reduction in grain size (GS) along with high values of tensile strength (TS). From the ANOVA, it was determined that both the investigated parameters and their combined effect created a significant response for GS reduction and increment in TS. The presented empirical regression quadratic model was validated for the adequacy of the projected results that were shown to be acceptable with the experimental investigated data. In addition, the desirability function approach was applied for a multiple response optimization in yielding the desired responses of GS and TS and simultaneously providing an optimized set of process parameters. Thus, the function declared 1.5 wt.% MWCNT–TiO2 and 180 A as the optimized process set for delivering the maximum TS at the designated range of GS for this system.Keywords
This publication has 33 references indexed in Scilit:
- A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheetJournal of Materials Processing Technology, 2017
- Investigation of microstructure evolution after post-weld heat treatment and cryogenic fracture toughness of the weld metal of AA2219 VPTIG jointsMaterials & Design, 2017
- Geometrical and microstructural characteristics of the TIG-CMT hybrid welding in 6061 aluminum alloy claddingJournal of Materials Processing Technology, 2017
- Microstructure and mechanical properties of carbon nanotubes/AZ31 magnesium composite gas tungsten arc welding filler rods fabricated by powder metallurgyDiamond and Related Materials, 2016
- Reduction of weld metal diffusible hydrogen content by adding colloidal nanosilica to the electrode coatingInternational Journal of Hydrogen Energy, 2016
- Microstructural analysis in GTA aluminum alloy welding using inverse problemsApplied Thermal Engineering, 2016
- Effect of TiC nanoparticles on the microstructure and mechanical properties of gas tungsten arc welded aluminum jointsJournal of Materials Processing Technology, 2015
- Improved microstructure and mechanical properties in gas tungsten arc welded aluminum joints by using graphene nanosheets/aluminum composite filler wiresMicron, 2014
- Effect of welding speed on microstructures, mechanical properties and corrosion behavior of GTA-welded AISI 201 stainless steel sheetsJournal of Materials Processing Technology, 2014
- Desirability function approach: A review and performance evaluation in adverse conditionsChemometrics and Intelligent Laboratory Systems, 2011