Influence of tool pin profile on mechanical and metallurgical behavior of friction stir welded AA6061-T6 and AA2017-T6 tailored blanks
- 11 August 2021
- journal article
- research article
- Published by IOP Publishing in Engineering Research Express
- Vol. 3 (3) , 035026
Abstract
The heat-treated and artificially aged aluminium alloys of AA6061 and AA2017 are friction stir welded by employing five different tool pin profiles keeping the other process parameters constant. From this investigation, the mechanical properties of welded blanks were evaluated. The test results revealed that the straight square tool pin profile exhibited a higher ultimate tensile strength of 253 MPa with a tensile elongation of 6.7%. Higher Microhardness and joint efficiency were reported compared to other pin profiles. The microstructures at different zones of the welded joint were examined using optical and scanning electron microscopy. More Flowability indications with fine grain structure were examined for a straight square tool pin profile. The presence of intermetallic and the formation of fine-grain structures were accountable for the improvement in microhardness. The pulsating action of the square pin profile produced a defect-free joint.Keywords
This publication has 35 references indexed in Scilit:
- Structure-Property Correlation of AA2014 Friction Stir Welds: Role of Tool Pin ProfileJournal of Materials Engineering and Performance, 2013
- Factors affecting the properties of Friction Stir Welds between aluminum and magnesium alloysMaterials Science and Engineering: A, 2012
- Correlation between weld nugget grain size, weld nugget hardness and tensile strength of friction stir welded commercial grade aluminium alloy jointsMaterials & Design (1980-2015), 2012
- Predicting tensile strength, hardness and corrosion rate of friction stir welded AA6061-T6 aluminium alloy jointsMaterials & Design (1980-2015), 2011
- A Review of FSW Research on Dissimilar Metal and Alloy SystemsJournal of Materials Engineering and Performance, 2010
- Effect of welding processes on tensile properties of AA6061 aluminium alloy jointsThe International Journal of Advanced Manufacturing Technology, 2009
- Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented toolJournal of Materials Processing Technology, 2008
- The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloyMaterials Letters, 2005
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Effects of friction stir welding on microstructure of 7075 aluminumScripta Materialia, 1997