Effect of hot water extracted hardwood and softwood chips on particleboard properties
Open Access
- 19 February 2014
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 68 (7) , 807-815
Abstract
The affinity of particleboard (PB) to water is one of the main limitations for using PB in moisture-rich environments. PB dimensional stability and durability can be improved by reducing the available hydroxyl groups in wood through hemicellulose removal, for example, by hot water extraction (HWE), which increases wood resistance to moisture uptake. The resulting liquid fraction from HWE is rich in hemicelluloses and can be used for chemicals and fuels, and the solid fraction is less hydrophilic. The objective of this study was to investigate the effects of HWE of softwood chips (conducted at 160°C and 90 min) and hardwood chips (160°C and 120 min) on the properties of PB panels. HWE increased compressibility and reduced springback by 34% and 44% for pine and maple chips, respectively, which positively impacted the PB properties. Water absorption of pine PB panels was lowered by 35% and that of maple PB panels by 30%, while reduction of thickness swelling was lowered by 39% for pine PB and 56% for maple PB after 24 h of immersion in water. The mechanical properties were not significantly affected.Keywords
This publication has 20 references indexed in Scilit:
- A review of wood thermal pretreatments to improve wood composite propertiesWood Science and Technology, 2013
- Biomass pretreatment: Fundamentals toward applicationBiotechnology Advances, 2011
- Effect of Hot Water Extraction on Hardwood Kraft Pulp fibers (Acer saccharum, Sugar Maple)Industrial & Engineering Chemistry Research, 2011
- Effects of Hot Water Extraction on Physical and Chemical Characteristics of Oriented Strand Board (OSB) Wood FlakesCLEAN – Soil, Air, Water, 2008
- Semi-isostatic densification of heat-treated radiata pineWood Science and Technology, 2007
- Mechanical behaviour of Québec wood species heat-treated using ThermoWood processEuropean Journal of Wood and Wood Products, 2007
- Lignin plasticization to improve binderless fiberboard mechanical propertiesPolymer Engineering & Science, 2005
- Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditionsJournal of Wood Science, 2000
- Hydrothermal processing of lignocellulosic materialsEuropean Journal of Wood and Wood Products, 1999
- Chemical and physical changes required for producing dimensionally stable wood-based compositesWood Science and Technology, 1988