Abstract
This paper presents a primary soap film gas flow standard developedat IMFIA, Universidad de la República, Uruguay, motivated by theneed for traceable low-flow calibration capabilities where externalcalibration entails high costs and logistical risks. The standardconsists of three glass burettes covering a combined range of5 mL/min to 30 L/min, designed using a systematic framework basedon two experimentally determined criteria: a maximum permissiblefilm speed of 100 mm/s and a minimum film lifetime of 150 s, whichtogether identify burette diameter as the governing design parameter.Volume was calibrated at an accredited laboratory and transit timewas determined by video frame counting at 60 fps, with the frameinterval calibrated against a national reference stopwatch. Acomplete uncertainty analysis, with every component traced toaccredited or national reference calibrations, yields standarduncertainties between 0.04 % and 0.9 % across the operating range.The standard was validated through calibration of twopositive-displacement flowmeters used in air quality monitoring, andsubsequently applied to calibrate secondary standards for a broadrange of industrial instruments. Results show that a systematicdesign framework based on explicit film behaviour criteria, combinedwith full traceability of all fundamental quantities throughaccredited calibration, is sufficient to achieve low standarduncertainties across most of the operating range using standardlaboratory equipment.