Determination of charge transport activation energy and injection barrier in organic semiconductor devices
Open Access
- 19 September 2017
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (11)
Abstract
Charge carrier transport in organic semiconductor devices is thermally activated with characteristic activation energies in the range of 0.2–0.6 eV, leading to strongly temperature-dependent behaviour. For designing efficient organic semiconductor materials and devices, it is therefore indispensable to understand the origin of these activation energies. We propose that in bilayer organic light-emitting diodes (OLEDs) employing a polar electron transport layer, as well as in metal-insulator-semiconductor (MIS) devices, the hole injection barrier Einj and the hole mobility activation energy Eμ can be decoupled from each other if temperature-dependent capacitance-frequency (C-f-T) and MIS-CELIV (charge extraction by linearly increasing voltage) experiments are combined. While the C-f-T signal contains information of both injection and transport, the CELIV current is expected to be insensitive to the electrode injection properties. We employ numerical drift-diffusion simulations to investigate the accuracy of this analytical parameter extraction approach and to develop criteria for its validity. We show that the implicit assumption of constant charge density and field profiles leads to systematic errors in determining the activation energies. Thus, one should be aware of the intrinsic limitations of the analytical Arrhenius fit, and for more accurate parameter determination a full drift-diffusion modelling is advised. Applying the analytical method to a standard bilayer OLED, we find that the total activation energy of 0.5 eV for the hole current can be split into contributions of ≈0.25 eV each for injection barrier and mobility. Finally, we also discuss the broader applicability of this method for other device stacks and material combinations.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (Br 1728/15-1)
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (151563)
This publication has 59 references indexed in Scilit:
- Reliable extraction of organic solar cell parameters by combining steady-state and transient techniquesOrganic Electronics, 2012
- Hole transport in the organic small molecule material α-NPD: evidence for the presence of correlated disorderJournal of Applied Physics, 2010
- Influence of injection barrier on the determination of charge-carrier mobility in organic light-emitting diodes by impedance spectroscopyThin Solid Films, 2008
- Determination of Injection Barriers in Organic Semiconductor Devices from Capacitance MeasurementsPhysical Review Letters, 2008
- Characterization of ITO/CuPc/AI and ITO/ZnPc/Al structures using optical and capacitance spectroscopySynthetic Metals, 2003
- Conjugated organic molecules on metal versus polymer electrodes: Demonstration of a key energy level alignment mechanismApplied Physics Letters, 2003
- Space-charge limited conduction with a field and temperature dependent mobility in Alq light-emitting devicesSynthetic Metals, 2001
- Band alignment at organic-inorganic semiconductor interfaces: α-NPD and CuPc on InP(110)Journal of Applied Physics, 1999
- Temperature dependent broadband impedance spectroscopy on poly-(p-phenylene-vinylene) light-emitting diodesJournal of Applied Physics, 1998
- Drift mobilities in amorphous charge-transfer complexes of trinitrofluorenone and poly-n-vinylcarbazoleJournal of Applied Physics, 1972