Investigation of mechanical properties of pineapple-viscose blended fabric reinforced composite
Authors:
Open Access
- 1 January 2022
- journal article
- research article
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 31
Abstract
Composites with regenerated fiber bonded with natural fibers have attracted growing attention as the globe becomes more sustainable, ecofriendly, and environment-friendly. Pineapple leaf fiber is used for composite in this study since it is also handled as waste nowadays. Furthermore, viscose was chosen as a study variant since no one had ever tried a pineapple and viscose mixed composite before. Due to a scarcity of natural fiber production on Earth, regenerated cellulosic fiber reinforced with natural fiber is widely employed, providing a nearly identical experience by employing partial or less natural fiber. This paper describes a study that used pineapple leaf fiber mixed with a viscose composite and reinforced with epoxy resin. Pineapple viscose blended composite is composed of 1/1 plain wave design, and epoxy resin is applied on them to make stability by the compression molding process. The tested Tensile Strength (σ), Young’s Modulus, and Eb% are 20.7 Mpa, 579 Mpa, and 9.4%, respectively. Some testing is also carried out to differentiate the properties like bending strength 23.5 Mpa, bending modulus 717.6 Mpa, and avg. The pH of the composite is 9.54. This article has different analytical parts to acknowledge the actual condition of composite behaviors. Finally, some suggestions are made as to where it may be utilized and where appropriate to use it, such as on building sites, in Geotextile materials, Coffee cups, coffee cans, and agro-textile materials.Keywords
This publication has 32 references indexed in Scilit:
- A Review on Pineapple Leaves Fibre and Its CompositesInternational Journal of Polymer Science, 2015
- A Review on Natural Fiber Reinforced Polymer Composite and Its ApplicationsInternational Journal of Polymer Science, 2015
- Polymer Selection Approach for Commonly and Uncommonly Used Natural Fibers Under Uncertainty EnvironmentsJOM, 2015
- Effect of viscose fabric modification on the mechanical and water absorption properties of composites prepared through vacuum infusionJournal of Reinforced Plastics and Composites, 2014
- A New Approach for PALF Productions and Spinning System: The Role of Surface TreatmentsJournal of Advanced Agricultural Technologies, 2014
- Properties of Graphene Oxide/Epoxy Resin CompositesJournal of Nanomaterials, 2014
- PLA-Viscose-Composites with Continuous Fibre Reinforcement for Structural ApplicationsProcedia Materials Science, 2013
- On impact damage detection and quantification for CFRP laminates using structural response data onlyMechanical Systems and Signal Processing, 2011
- Cellulosic/synthetic fibre reinforced polymer hybrid composites: A reviewCarbohydrate Polymers, 2011
- Renewable materials to reduce building heat loss: Characterization of date palm woodEnergy and Buildings, 2011