High resolution bolt pre-load looseness monitoring using coda wave interferometry
Open Access
- 30 December 2021
- journal article
- research article
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 21 (5) , 1959-1972
Abstract
This paper proposes a new concept, named the Detectable Resolution of Bolt Pre-load (DRBP), by using the coda wave interferometry (CWI) to quantitatively measure the pre-load looseness at a high resolution. Due to its characteristics of roughness, irregularity, and randomly distributed asperities, the contact surface of the bolted components can function as a natural interferometer to scatter the propagation waves. The multiply-scattered coda waves can amplify the slight changes in the travel path and show the visible perturbation in the time domain. By calculating the time-shifted correlation coefficient of coda waves before and after the slight pre-load looseness, the tiny pre-load changes can be clearly revealed. To evaluate the feasibility of the proposed method, a theoretical model considering the time shifts of coda waves and the variations of pre-load is established. Based on the acoustoelastic effect and the wave path summation theory of coda wave interferometry, the model shows that the time shifts of coda waves change linearly with the variations of pre-load. Verification experiments are conducted, and the results show that the R-square values of the fitting curves are larger than 0.9216. In addition, the proposed approach has the feature of high resolution. The ultimate pre-load resolution of the proposed approach is 0.331%, that is, when the variation of pre-load is larger than 0.331%, it can be detected. Therefore, theoretical analysis and experimental results prove that the CWI-based pre-load detection approach holds great potential for the detection of bolt pre-load looseness, especially during the initial stage.Keywords
This publication has 68 references indexed in Scilit:
- Earthquake‐volcano interaction imaged by coda wave interferometryGeophysical Research Letters, 2012
- Damage detection in concrete using coda wave interferometryNDT & E International, 2011
- Modeling and Detection of Joint Loosening using Output-Only Broad-Band Vibration DataStructural Health Monitoring, 2008
- Observation of multiple scattering of kHz vibrations in a concrete structure and application to monitoring weak changesPhysical Review E, 2006
- Quantitative health monitoring of bolted joints using a piezoceramic actuator–sensorSmart Materials and Structures, 2003
- Structural Health Monitoring Using Modular Wireless SensorsJournal of Intelligent Material Systems and Structures, 2003
- Coda Wave Interferometry for Estimating Nonlinear Behavior in Seismic VelocityScience, 2002
- The static and fatigue strength of bolted joints in composites with hygrothermal cyclingComposite Structures, 2001
- Monitoring a temporal change of seismic velocity in a volcano: Application to the 1992 eruption of Mt. Merapi (Indonesia)Geophysical Research Letters, 1995
- Second-Order Elastic Deformation of SolidsPhysical Review B, 1953