Evaluation of Creep Crack Growth Rate of P92 Welds Using Fracture Mechanics Parameters
Authors:
- 23 July 2010
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 132 (4) , 041404
Abstract
High Cr ferritic heat resisting steels have been widely used for boiler components in ultrasupercritical thermal power plants operated at about . In the welded joint of these steels, type-IV crack initates in the fine-grained heat affected zone during long-term use at high temperatures and their creep strength decreases. In this paper, creep properties and creep crack growth (CCG) properties of P92 welds are presented. The CCG tests are carried out using cross-welded compact tension specimens at several temperatures. The crack front was located within the fine-grained HAZ region to simulate type-IV cracking. Finite element analysis was conducted to simulate multiaxiality in welded joints and to compare experimental results. The constitutive behavior for these materials is described by a power-law creep model. and parameters are used to evaluate CCG rate of P92 welds for comparison. parameters can characterize approximately 20% of the total life of CCG in P92 welds, and parameters can characterize approximately 80% of the total life. parameter is one of the useful parameters to predict CCG life in P92 welds.
Keywords
This publication has 16 references indexed in Scilit:
- Comparison of creep crack growth rate in heat affected zone of welded joint for 9%Cr ferritic heat resistant steel based on C∗, dδ/dt, K and Q∗ parametersEngineering Fracture Mechanics, 2007
- Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel2007
- Effects of Alloying Additions and Material Structures on the High Accuracy of the Predictive Law of Creep Crack Growth for W Strengthened 9-12%Cr Ferritic Heat Resistant SteelJournal of the Japan Institute of Metals and Materials, 2006
- Characterization of high temperature creep crack growth and creep life from high temperature ductile through to high temperature brittle materialsEngineering Fracture Mechanics, 1991
- Prediction of creep crack growth from uniaxial creep dataProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1984
- Parametric Representation of Crack Growth Rate Under Creep, Fatigue and Creep-Fatigue Interaction at High TemperaturesJournal of Engineering Materials and Technology, 1983
- Creep relaxation of stress around a crack tipInternational Journal of Solids and Structures, 1981
- A new parameter for prediction of creep crack growth rate at high temperatureEngineering Fracture Mechanics, 1980
- Hydrogen dissolution in magnesium: A resistometric study under pressureScripta Metallurgica, 1980
- On the ductile enlargement of voids in triaxial stress fields∗Journal of the Mechanics and Physics of Solids, 1969