Frictional Constraint of Rope Strands
Author:
- 1 January 1993
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 84 (2) , 199-213
Abstract
In this study, the slippage criterion and model of synthetic double-braided ropes have been formulated, particularly, for the partial frictional conditions. Such constraint is closest to reality, and contributes to most failure cases in marine service due to abrasion/wear. The slippage criterion proposed is based on the measured frictional resistance of individual rope strands from a newly devised pull-out test. Emphasis is on straight ropes as well as rope terminations, the latter either an eye splice or a continuous loop on a bollard-like pin. The experimental results agree well with the predictions of the partial friction case for small nylon ropes. However, for PET ropes, the predictions of the infinite friction case agree better with the experiments due partially to high frictional constraint. The slippage process is also discussed and this can provide further insight into prevention against abrasion failures which are found to be the major cause of the deterioration of ropes in service.Keywords
This publication has 3 references indexed in Scilit:
- An Energy Approach for Rope-strength PredictionThe Journal of the Textile Institute, 1992
- Modeling of Marine Rope Fatigue BehaviorTextile Research Journal, 1987
- Fatigue behaviour of synthetic fibres, yarns, and ropesJournal of Materials Science, 1985