Discovering HD Characteristics with HT Flow Behavior of Nb/B Low-Carbon Steel Using Gleeble Thermomechanical Simulations
Open Access
- 3 September 2025
- journal article
- research article
- Published by Springer Nature in JOM
- Vol. 77 (11) , 8696-8706
Abstract
High-temperature deformation behavior and hot ductility characteristics of Nb/B microalloyed low carbon steel were examined using Gleeble thermomechanical simulation. The study emphasizes the role of niobium (Nb) and boron (B) additions in modifying embrittlement zones, precipitation kinetics, and recrystallization behavior during thermomechanical processing (TMP). Three distinct steel compositions, produced via compact strip production (CSP) technology, were subjected to controlled deformation and cooling regimes using the Gleeble 3500 simulator. Mechanical testing, including high-temperature tensile tests, was conducted, while microstructural evolution was examined using optical microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). Th findings revealed that adding 0.015% Nb to low-carbon steel increases the non-recrystallization temperature, promoting grain boundary pinning and elevating flow stress by 29 ~ 49 MPa at temperatures of 800 ~ 1050°C. Also, the addition of 0.015% Nb leads to a decline in hot ductility at temperatures above 1150°C by ~ 8% and below 1000°C by ~ 6%. On the other hand, incorporating 30 ppm B counteracts this embrittlement by facilitating BN precipitation, which reduces Nb(C,N) formation and minimizes excessive grain boundary strengthening effects. Assessment of the Zener–Hollomon (Z-H) parameter further establishes a strong correlation between strain rate, deformation resistance, and microalloy precipitation behavior. These results provide insights into optimizing industrial rolling schedules. This study bridges the gap between industrial CSP processing conditions and controlled laboratory simulations for understanding hot rolling deformation mechanics.Keywords
Funding Information
- Suez Canal University
This publication has 28 references indexed in Scilit:
- Thermomechanical simulation of the heat-affected zones in welded ultra-high strength steels: Microstructure and mechanical propertiesMaterials & Design, 2022
- Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steelInternational Journal of Pressure Vessels and Piping, 2020
- Physical simulation technology for thermo-mechanical processing of metallic alloys using Gleeble systemMaterials Today: Proceedings, 2020
- Optimization of TMCP strategy for microstructure refinement and flow-productivity characteristics enhancement of low carbon steelJournal of Materials Research and Technology, 2019
- Effect of thermal and thermo-mechanical cycling on the boron segregation behavior in the coarse-grained heat-affected zone of low-alloy steelMaterials Characterization, 2016
- Flow Behavior and Processing Maps of a Low-Carbon Steel During Hot DeformationMetallurgical and Materials Transactions A, 2015
- Extreme grain refinement by severe plastic deformation: A wealth of challenging scienceActa Materialia, 2013
- Effect of Boron Precipitation Behavior on the Hot Ductility of Boron Containing SteelMetallurgical and Materials Transactions A, 2010
- Hot ductility behavior of boron microalloyed steelsMaterials Science and Engineering: A, 2007
- Effect of boron on the hot ductility of Nb-containing steelMetallurgical and Materials Transactions A, 2002