Electrical Monitoring of Damper Bar Condition in Salient-Pole Synchronous Motors Without Motor Disassembly
- 13 January 2020
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (2) , 1423-1431
Abstract
The damper (or amortisseur) winding of synchronous motors (SM) is a critical component required for starting the motor. Several cases of forced outage of industrial processes due to starting failure of salient pole SMs caused by damper bar failure have recently been reported. Detection of broken damper bars is difficult since they are active only during rotor acceleration, and off-line visual inspection is the only means of testing available in the field. It was recently shown that broken damper bars can be detected from the airgap flux, but this requires installation of airgap flux sensors inside the motor. In this paper, a method based on analysis of the stator starting current is proposed for detecting broken damper bars. In addition, an electrical detection method based on signal injection from the motor terminals is proposed. The new methods have been devised to provide remote testing from the motor control center without motor disassembly required in existing tests. Finite element (FE) analysis and experimental testing performed on 1 MW and 30 kW salient pole SMs with emulated broken damper bars show that the proposed methods can provide sensitive and reliable detection of damper bar failures.Keywords
Funding Information
- National Research Foundation of Korea
- Korea government (NRF-2019R1A2C1084104)
This publication has 19 references indexed in Scilit:
- An investigation into damper winding failure in a large synchronous motor2015
- Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time–Frequency ToolsIEEE Transactions on Industrial Electronics, 2014
- Comparative investigation of fault indicators for synchronous machine failures2014
- Reliable detection of rotor bar failures in induction motors operating in petrochemical plants2014
- Toward Condition Monitoring of Damper Windings in Synchronous Motors via EMD AnalysisIEEE Transactions on Energy Conversion, 2012
- Automated Detection of Rotor Faults for Inverter-Fed Induction Machines Under Standstill ConditionsIEEE Transactions on Industry Applications, 2010
- Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machinesIEEE Transactions on Industry Applications, 2006
- Improving the Starting Performance of Large Salient-Pole Synchronous MachinesIEEE Transactions on Magnetics, 2004
- Detection of Broken Damper Bars of a Turbo Generator by the Field Winding.Renewable Energy and Power Quality Journal, 2004
- Broken damper bar detection studies using flux probe measurements and time-stepping finite element analysis for salient-pole synchronous machines2003